Support. Avantree TWS120 True Wireless Earbuds for Clear Phone Calls, TWS120

Reset the L earphone

1. Open the case and pick out the L earphone only. Then close the case. (Fig 5-1)

2. Wait for LED on the L earphone to flash WHITE & RED alternately – Pairing Mode. (Fig 5-2)

3. Long press the L earphone for about 10 seconds, until LED lights on WHITE & RED simultaneously (looks like

PINK ) for about 5 seconds. (Fig 5-3)

L

Hold 10s

R

L

Fig 5-1 Fig 5-2 Fig 5-3

Note: the steps above can only clear the pairing history between TWS120 / TWS120S with your Bluetooth device. If you experience one side sound, please visit here to connect the two earphones manually avantree.

com/tws120/video

Please forget / delete any TWS120 / TWS120S on the Bluetooth list of your device before you want to pair it again.

4:30

Settings Bluetooth

5G

Bluetooth

Now discoverable as “iPhone(2)”

MY DEVICES

Avantree TWS120

Avantree HS134

Connected

Not Connected

OTHER DEVICES

To pair an Apple Watch with your iPhone, go to the Watch app .

4:30

Bluetooth Avantree TWS120

Forget This Device

5G

Support

FAQ

View the FAQs on https://avantree.com/product-support/BTHS-TWS120-BLK .

6

How to take care of your TWS120

- Always store the earphones inside the charging case and make sure that they are safely protected.

- If you would like to clean your earphones, we recommend that you follow these instructions.

- The TWS120 is designed to function optimally between the temperatures of 0°C and 40°C (32-100°F.)

Although it can and will function beyond this temperature range, performance may be impaired.

- Avoid storing the earphones for extended periods of time without recharging them (max. three months.)

- The charging case is designed to charge using standard USB voltage (5v ± 0,25v). It is not recommended to charge this product using power supplies/sources with higher voltage.

7