Product Overview. Linksys RE7350, RE7350 AX1800 Max-Stream WiFi 6 Range Extender
Add to My manuals50 Pages
advertisement
Product Overview
Front view
The light on the front of the range extender gives you information about power, updating and signal strength.
Light color Status/ description
Solid Blue • Power on, ready for device connection
• Starting up.
• Upgrading firmware.
Blinking Blue
(normal state)
Blinking Orange
(normal state)
Blinking Blue
(WPS pairing)
Blinking Orange
(WPS pairing)
Solid Orange for
2 minutes
(WPS pairing)
• Not connected to the router or other error.
• WPS pairing in process
• Overlapping WPS pairing sessions
• WPS pairing unsuccessful
3
Side view
WPS™ Button —Use Wi-Fi Protected Setup to automatically and securely add compatible wireless
devices to your network with Push Button Connect. Refer to Using WPS on page 6 .
Reset Button —Press and hold until the power light on the front of the range extender blinks to reset to factory defaults. You can also restore the defaults from the Administration > Factory
Defaults screen in the extender’s settings interface (page 16 ).
4
Bottom view
Ethernet Port —Connect wired devices to your wireless network with an ethernet (network) cable.
A green light turns on when an ethernet device is connected and active on this port. An orange light blinks when the extender is sending or receiving data over the port.
5
advertisement
Related manuals
advertisement
Table of contents
- 3 Product Overview
- 6 How to Install the Range Extender
- 14 Accessing Your Range Extender Settings
- 16 Using Range Extender Settings
- 21 Troubleshooting
- 24 Specifications
- 28 Vue d'ensemble du produit
- 31 Installation de l'amplificateur de portée
- 39 Accéder aux paramètres de votre amplificateur de portée
- 41 Utilisation des paramètres de l'amplificateur de portée
- 46 Dépannage
- 49 Spécifications