advertisement
![Traffic Information Function. Kenwood KMD-671R | Manualzz Traffic Information Function. Kenwood KMD-671R | Manualzz](http://s3.manualzz.com/store/data/059496134_1-51f846ab9ce45396ec6b183a2505ec36-360x466.png)
Cancelling Programme Type Function During Its Operation:
Press the PTY button for one second or more.
• Holding the TI button down for one second or more when the
TI function is on in the disc control mode results in a change to the frequency display of the traffic information station for five seconds.
Traffic Information Function
You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast.
Presetting Volume for Traffic Information/News
Preset the volume level to be used for traffic information and news broadcasts.
Turning TI function On/Off:
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When none is being received, the TI indicator will blink on and off. When a traffic information station is being received, the TI indicator will turn on.
When a traffic bulletin begins to be broadcast, "TRAFFIC" will be displayed, and reception will begin at the preset volume.
If you are listening to a tape or disc when a traffic bulletin begins, they will automatically be turned off. When the bulletin ends or poor reception is experienced, the tape or disc will begin playing again.
NOTE
Pressing the TI button whilst in the MW/LW band automatically switches reception to the FM band. However, the MW/LW band is not returned to when the TI button is pressed again.
Switching to a Different Traffic Information Station:
Use the
4
/
¢ buttons to make an auto seek of the TI stations in a certain band.
NOTE
• When you are listening to a tape or disc, you cannot change to another TI station.
• When the auto TP seek function is turned on and reception starts to weaken, the tuner automatically seeks traffic information stations with better reception.
• If you are tuned to a station that is not a traffic information station itself but which provides <Enhanced Other Network> services, you can still have traffic information received.
— 13 —
1
2
3
Tune into the station for which you want to set the volume.
Adjust the volume to the desired level.
Hold down the VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the data has been stored.
Future traffic information/news broadcasts are heard at the preset level.
NOTE
• The volume cannot be lowered by this function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner.
• You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum.
advertisement
Related manuals
advertisement
Table of contents
- 3 Safety precautions
- 5 Power
- 5 Volume
- 5 Attenuator
- 6 Switching Modes
- 6 Loudness
- 6 Audio Control Setting
- 7 Mobile Preset
- 8 TEL Mute
- 8 Theft Deterrent Faceplate
- 9 Tuning
- 10 Station Preset Memory
- 10 Switching Display for Tuner
- 11 RDS (Radio Data System)
- 11 Enhanced Other Network
- 11 Alarm
- 12 Programme Type (PTY) Function
- 13 Traffic Information Function
- 13 Presetting Volume for Traffic Information/News
- 14 Radio Text Scroll
- 15 Playing MDs
- 15 Playing Other Disc mode
- 16 Switching Display for Discs
- 16 Fast Forwarding and Reversing Disc Play
- 16 Track Search
- 17 Disc Search
- 17 Track / Disc Repeat
- 17 Track Scan
- 18 Disc Scan
- 18 Random Play
- 18 Magazine Random Play
- 18 Text / Title Scroll
- 20 Presetting Disc Names(DNPS)
- 21 Menu System
- 22 Touch Sensor Tone
- 22 Manual Time Adjustment
- 22 Calendar Adjustment
- 22 Calendar Mode
- 22 Memo Mode
- 23 Automatic Time Adjustment
- 24 Disabled System Indicator (DSI)
- 24 Selectable Illumination
- 24 Contrast Adjustment
- 24 Switching Graphic Display
- 24 ec4/dB (Sound Coodinate system)
- 24 with PTY News Timeout Setting
- 25 Local Seek Function
- 25 Selecting Tuning Mode
- 25 Auto Memory Entry
- 25 AF (Alternative Frequency) Function
- 26 Restricting RDS Region (Region Restrict Function)
- 26 Auto TP Seek Function
- 26 Monaural Reception
- 26 Text Scroll
- 27 Accessories
- 27 Installation Procedure
- 28 Connecting Cables to Terminals
- 29 Installation
- 31 Troubleshooting Guide
- 35 Specifications