advertisement
Connecting Cables to Terminals
Antenna Cord (ISO)
Fuse (10A)
Antenna Conversion Adaptor (ISO–JASO) (Accessory 3 )
FM/AM antenna input
Rear left output (White)
KENWOOD disc changer control input
NOTE
To connect the Disc changer, consult your Disc changer manual.
Connector Function Guide
Pin Numbers for
ISO Connectors
External
Power
Connector
A–4
A–5
Cable Colour
Yellow
Blue/White
A–7
A–8
Red
Black
Functions
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Rear Right (
Rear Right (
+ )
– )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
Rear right output (Red)
Wiring harness
(Accessory 1 )
Battery cable (Yellow)
Ignition cable (Red)
TEL mute cable (Brown)
TEL MUTE
If no connections are made, do not let the cable come out from the tab.
Connect to the terminal that is grounded when either the telephone rings or during conversation.
NOTE
To connect the KENWOOD navigation system, consult your navigation manual.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
8
7
6
5
8
7
6
5
4
3
4
3
2
1
2
1
Power control/ Motor antenna control cable
(Blue/White)
P.CONT
ANT.CONT
Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
— 28 —
advertisement
Related manuals
advertisement