Menu System. Kenwood KMD-671R

Menu settings

ATT

LOUD

1

SCAN

2

RDM

3

REP

4

D.SCN

5

M.RDM

6

KMD-671R

PWR

OFF

PTY

SRC

DISC +

FM

MENU

AUD

TI VOL ADJ CLK NAME.S

AM

DISC -

Menu display

AUTO indicator

™ indicator

NEWS indicator

Graphic display

Menu System

You can set the defaults for additional functions in the menu mode.

Make a setting for each function, referring to the following operations.

1

2

Enter the menu mode

Hold down the MENU button for one second or more.

"MENU" is displayed when the menu mode is entered.

The function that you can adjust is indicated with the current settings displayed.

Selecting function to set

Press the FM button to search through the functions until you see the one you want to adjust in the display.

Press the AM button to search through the functions backward.

Example: If you want to switch the tuning mode from auto1 to manual, first search through the functions until you see "Auto 1" in the display.

3

Changing setting for currently displayed function

Press either the 4 or ¢ button.

The setting will change for each function.

Example: The tuning mode will switch from auto 1 to auto 2.

Pressing the button again switches the setting to manual, and "Manual" is displayed.

4

Ending the menu mode

Press the MENU button.

NOTE

Make sure to end the menu mode when finished.

If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the

News Bulletin function with PTY news timeout setting, and the

Alarm function.

— 21 —