Connections and setup. Roku Onn. TV 32″ HD 720P TV [100012589], onn

Connections and setup

Refer to your TV’s Quick Start Guide or other provided documentation to for modelspecific information about attaching the base or a wall mount and making connections to AC power and to your other audio/video devices. The following information applies to all Roku TV models.

Connecting an antenna, cable, or satellite box

If you are using an antenna, CATV cable without a set-top box, or a cable or satellite box that has only an antenna output, connect a 75-ohm coaxial cable (not provided) from the device to the ANT/CABLE input on the TV.

Tip : If you are using an antenna with a 300-ohm twin-lead cable, you need to use a

300-to-75-ohm adapter (not provided) to adapt the twin-lead cable to a connection that is compatible with the TV’s antenna input.

Tip : If you receive your TV stations through a set top box from a cable or satellite TV provider, connect it to the TV using the best connection method available. From most to least desirable:

• HDMI ® input – Digital HD and SD video

• AV input – analog SD video

• Antenna input – analog SD video using NTSC

6