Scan again for live TV channels. Roku Onn. TV 32″ HD 720P TV [100012589], onn

Scan again for live TV channels

There will be times when you need to create a new channel list. For example, you:

• Change cable providers

• Reorient your TV antenna

• Move to a different city with different channels

Whenever you need to update your TV channel list, you can repeat the channel scan.

Tip : Even if you don’t change anything related to your TV channel reception, you should repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broadcasters add and remove channels, move channels to different parts of the spectrum, and change the power levels of their channels periodically.

Note : Repeating the tuner channel scan unhides all hidden channels.

To repeat the channel scan, highlight the Live TV tile on the Home screen, and then press STAR  . Next, select Scan for channels and press OK . After that, the screens

and options that appear during this process are identical to those described in How do I set up the TV tuner?

HDMI

®

mode (4K models only)

On 4K (UHD) TVs, you can independently configure each HDMI input to match the capabilities of the connected device. From the Home screen menu, navigate to

Settings > TV inputs , and then select an enabled HDMI input. Next, select HDMI mode and then select one of the following settings:

• Auto – Let the TV determine the best setting. Use this option unless your

HDMI ® device does not correctly communicate its HDMI ® version information.

• HDMI 1.4

– Configure the input for compatibility with HDMI ® version 1.4, which supports a maximum refresh rate of 30 Hz at full UHD resolution. Most HDMI ® devices will work correctly with the TV in this mode.

132