How do I set up the TV tuner?. Roku Onn. TV 32″ HD 720P TV [100012589], onn

How do I set up the TV tuner?

1.

Make sure your antenna (not provided) or TV cable is connected to the TV’s

ANT/CABLE input.

2.

On the Home screen, select the Live TV tile. If it is not on your Home screen, go to Settings > TV Inputs to add it.

3.

Read the simple on-screen instructions, and then select Start finding channels .

4.

If prompted, select your time zone. You’ll only need to do this if the TV can’t figure out your time zone from your Internet connection.

39

Why does the TV need my time zone?

The TV needs to know your time zone so that it can correctly display time information about the program you are currently watching. In most cases, it can get the time zone automatically and skips this step.

5.

When prompted, select whether to add analog channels 3 and 4. These channels enable you to connect older set top boxes, VCRs, or game consoles.

6.

Wait while your TV scans for live TV stations…

40

… and then cable TV channels.

Scanning for channels can take several minutes.

Tip : If you use a set-top box to receive cable TV channels (and don’t have your cable connected directly to the TV’s ANT input), you can save time by skipping the cable TV portion of the channel scan.

7.

When the channel scans finish, the TV shows the number of channels it added.

41

8.

Only in connected mode , you have the option of setting up Live TV Pause.

Pausing live TV explains how to set up and use this feature. If you don’t want to

set up Live TV Pause, or if this option is not available to you, select Done to start watching live TV.

Tip : Repeat the channel scan from time to time to make sure you are receiving all of the latest channels. Broadcasters add and remove channels, move channels to different parts of the spectrum, and change the power levels of their channels periodically. Your antenna reception and picture quality depend on the position of your antenna and on your location relative to the antennas of broadcasters in your area. To repeat the channel scan, use the purple directional pad to highlight the

Live TV tile, press STAR  , select Scan for channels , and then press OK .

You’ll also have to repeat the channel scan if you remove and re-add the Live TV tile from the Home screen or perform a factory reset.

Now, you’re ready to watch live TV! While you’re watching, try the following tips:

• Press UP or DOWN to change channels.

• Press LEFT to display the channel list (non-connected mode) or Live TV

Channel Guide (connected mode), and then press UP or DOWN to select a channel to watch. Or press REWIND or FAST FWD to jump through the channel list or Live TV Channel Guide a page at a time.

• Press OK to display information about the current program.

• Press STAR  to see options for picture and sound settings.

• Only in connected mode, use a Roku Voice remote, the Roku mobile app,

Google Assistant, or Amazon Alexa to search for programmes by title, actor, director, or genre. The TV or the Roku mobile app displays the results along with the streaming channels that offer the requested content.

Note : If your TV did not come with a Roku Voice remote, you can order one from https://www.roku.com/products/accessories/roku-tv .

42