6
Risk of burns.
The device surface can become hot during continuous operation.
▶ Do not touch the device with your bare hands.
General hazardous situations.
To prevent injuries, ensure that:
▶ The system cannot be activated unintentionally.
▶ Installation and maintenance may be performed by authorised technicians only and with the appropriate tools.
▶ The process must be restarted in a defined or controlled manner after an interruption in the power supply or pneumatic supply.
▶ Device may be operated only when in perfect condition and in consideration of the operating instructions.
▶ The general rules of technology must be followed for application planning and operation of the device.
Please observe the following in order to protect against damage to the device:
▶
Feed only those media listed in chapter „7 Technical data“ into
the medium ports.
▶ Do not place the valve under mechanical stress (e.g. by placing objects on it or standing on it).
▶ Do not make any external modifications to the valves.
▶ Do not paint housing parts or screws.
Type 2012
Generalnotes
4 GENERAL NOTES
4.1 Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Centre
Christian-Bürkert-Str. 13–17
D-74653 Ingelfingen
Tel. +49 (0) 7940 - 10 91 111
Fax +49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
The contact addresses can be found on the back pages of the printed operating instructions.
They are also available online at: www.burkert.com
4.2 Warranty
A precondition for the warranty is that the Type 2012 globe valve is used as intended in consideration of the specified operating conditions.
4.3 Information on the Internet
Operating instructions and data sheets for Type 2012 can be found online at: country.burkert.com
English
