Care and Maintenance. Magnavox MVH-3000

CARE AND MAINTENANCE

WARNING: Before performing any maintenance task, turn off the power switch in the rear of the unit, unplug the unit, and allow it to cool completely .

1 . To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if necessary . After cleaning, dry the unit with a soft cloth .

CAUTION: DO NOT let liquid enter the heater .

2 . DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater . This may cause damage or deterioration to the surface of the heater .

3 . DO NOT immerse the heater in water .

4 . Wait until the unit is completely dry before use .

5 . If you will not be using the heater for a while, take the batteries out of the remote control and store for future use .

6 . Store the heater in a cool, dry location when not in use . To prevent dust and dirt build-up, use the original packaging to repack the unit .

CLEANING THE AIR FILTER

1 . Clean the air filter (2) after three months or if it appears to be blocking airflow . With the heater unplugged, remove the air filter cover (1) as illustrated below . Clean all parts of the filter assembly and allow parts to completely dry .

2 . Reassemble and reinstall the filter (2) .

WARNING: Do not use the heater without the filter assembly in place .

1

13

2

1