- Computers & electronics
- Computer components
- System components
- Motherboards
- MSI
- MS-7C13
- Owner's manual
advertisement
![Safety Information. MSI MS-7C13 | Manualzz Safety Information. MSI MS-7C13 | Manualzz](http://s2.manualzz.com/store/data/061893183_1-759fe3ce657ea50fadde7e8444701e59-360x466.png)
Safety Information
y The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. y Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. y Hold the motherboard by the edges to avoid touching sensitive components. y It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. y Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed. y Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
y Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user. y If you need help during any installation step, please consult a certified computer technician.
y Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
y Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60 damage the motherboard.
° C (140 ° F), it may
2
Safety Information
advertisement
Related manuals
advertisement
Table of contents
- 2 Safety Information
- 3 Specifications
- 6 Rear I/O Panel
- 6 LAN Port LED Status Table
- 8 Overview of Components
- 9 CPU Socket
- 10 DIMM Slots
- 10 PCI_E1~3: PCIe Expansion Slots
- 11 JFP1, JFP2: Front Panel Connectors
- 11 SATA1~4: SATA 6Gb/s Connectors
- 12 ATX_PWR1, CPU_PWR1: Power Connectors
- 12 JAUD1: Front Audio Connector
- 13 JUSB1: USB 2.0 Connector
- 13 JUSB2: USB 3.1 Gen1 Connector
- 14 JTPM1: TPM Module Connector
- 14 JCOM1: Serial Port Connector
- 15 JCI1: Chassis Intrusion Connector
- 16 CPU_FAN1, SYS_FAN1: Fan Connectors
- 17 JBAT1: Clear CMOS (Reset BIOS) Jumper
- 17 EZ Debug LED
- 18 BIOS Setup
- 18 Entering BIOS Setup
- 19 Resetting BIOS
- 19 Updating BIOS
- 20 Software Description
- 20 Installing Drivers
- 20 Installing Utilities
- 42 Informations de sécurité
- 43 Spécifications
- 46 Panneau arrière Entrée/ Sortie
- 49 Socket processeur
- 50 Slots DIMM
- 51 JFP1, JFP2 : Connecteurs de panneau avant
- 51 SATA1~4 : Connecteurs SATA 6 Gb/s
- 52 JAUD1 : Connecteur audio avant
- 53 JUSB1 : Connecteur USB
- 53 JUSB2 : Connecteur USB 3.1 Gen
- 54 JTPM1 : Connecteur de module TPM
- 54 JCOM1 : Connecteur de port série
- 55 JCI1 : Connecteur intrusion châssis
- 56 CPU_FAN1, SYS_FAN1 : Connecteurs pour ventilateurs
- 57 JBAT1 : Cavalier Clear CMOS (Réinitialisation BIOS)
- 57 EZ Debug LED
- 58 Configuration du BIOS
- 59 Réinitialiser le BIOS
- 59 Mettre le BIOS à jour
- 60 Informations sur les logiciels
- 60 Installer les pilotes
- 60 Installer les utilitaires
- 62 Sicherheitshinweis
- 63 Spezifikationen
- 66 Rückseite E/A
- 66 LAN Port LED Zustandstabelle
- 68 Übersicht der Komponenten
- 69 CPU Sockel
- 70 DIMM-Steckplätze
- 70 PCI_E1~3: Erweiterungssteckplätze
- 71 JFP1, JFP2: Frontpanel-Anschlüsse
- 71 SATA1~4: SATA 6Gb/s Anschlüsse
- 72 ATX_PWR1, CPU_PWR1: Stromanschlüsse
- 72 JAUD1: Audioanschluss des Frontpanels
- 73 JUSB1: USB 2.0 Anschluss
- 73 JUSB2: USB 3.1 Gen1 Anschluss
- 74 JTPM1: TPM Anschluss
- 74 JCOM1: Serieller Anschluss
- 75 JCI1: Gehäusekontaktanschluss
- 76 CPU_FAN1, SYS_FAN1: Stromanschlüsse für Lüfter
- 77 JBAT1: Clear CMOS Steckbrücke (Reset BIOS)
- 77 EZ Debug LED
- 78 BIOS-Setup
- 78 Öffnen des BIOS Setups
- 79 Reset des BIOS
- 79 Aktualisierung des BIOS
- 80 Softwarebeschreibung
- 80 Installation von Treibern
- 80 Installation von Utilities
- 76 DIMM
- 76 PCIe
- 79 USB 3.1 Gen
- 83 BIOS)
- 84 BIOS