- Computers & electronics
- Computer components
- System components
- Motherboards
- MSI
- MS-7C13
- Owner's manual
advertisement
![CPU Socket. MSI MS-7C13 | Manualzz CPU Socket. MSI MS-7C13 | Manualzz](http://s2.manualzz.com/store/data/061893183_1-759fe3ce657ea50fadde7e8444701e59-360x466.png)
Overview of Components
CPU Socket
Please install the CPU into the CPU socket as shown below.
2
1
3
8
7
5
4
6
9
Important y Always unplug the power cord from the power outlet before installing or removing the CPU.
y Please retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.
y When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.
y Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
y Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
y Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.
y If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.
Overview of Components
9
advertisement
Related manuals
advertisement
Table of contents
- 2 Safety Information
- 3 Specifications
- 6 Rear I/O Panel
- 6 LAN Port LED Status Table
- 8 Overview of Components
- 9 CPU Socket
- 10 DIMM Slots
- 10 PCI_E1~3: PCIe Expansion Slots
- 11 JFP1, JFP2: Front Panel Connectors
- 11 SATA1~4: SATA 6Gb/s Connectors
- 12 ATX_PWR1, CPU_PWR1: Power Connectors
- 12 JAUD1: Front Audio Connector
- 13 JUSB1: USB 2.0 Connector
- 13 JUSB2: USB 3.1 Gen1 Connector
- 14 JTPM1: TPM Module Connector
- 14 JCOM1: Serial Port Connector
- 15 JCI1: Chassis Intrusion Connector
- 16 CPU_FAN1, SYS_FAN1: Fan Connectors
- 17 JBAT1: Clear CMOS (Reset BIOS) Jumper
- 17 EZ Debug LED
- 18 BIOS Setup
- 18 Entering BIOS Setup
- 19 Resetting BIOS
- 19 Updating BIOS
- 20 Software Description
- 20 Installing Drivers
- 20 Installing Utilities
- 42 Informations de sécurité
- 43 Spécifications
- 46 Panneau arrière Entrée/ Sortie
- 49 Socket processeur
- 50 Slots DIMM
- 51 JFP1, JFP2 : Connecteurs de panneau avant
- 51 SATA1~4 : Connecteurs SATA 6 Gb/s
- 52 JAUD1 : Connecteur audio avant
- 53 JUSB1 : Connecteur USB
- 53 JUSB2 : Connecteur USB 3.1 Gen
- 54 JTPM1 : Connecteur de module TPM
- 54 JCOM1 : Connecteur de port série
- 55 JCI1 : Connecteur intrusion châssis
- 56 CPU_FAN1, SYS_FAN1 : Connecteurs pour ventilateurs
- 57 JBAT1 : Cavalier Clear CMOS (Réinitialisation BIOS)
- 57 EZ Debug LED
- 58 Configuration du BIOS
- 59 Réinitialiser le BIOS
- 59 Mettre le BIOS à jour
- 60 Informations sur les logiciels
- 60 Installer les pilotes
- 60 Installer les utilitaires
- 62 Sicherheitshinweis
- 63 Spezifikationen
- 66 Rückseite E/A
- 66 LAN Port LED Zustandstabelle
- 68 Übersicht der Komponenten
- 69 CPU Sockel
- 70 DIMM-Steckplätze
- 70 PCI_E1~3: Erweiterungssteckplätze
- 71 JFP1, JFP2: Frontpanel-Anschlüsse
- 71 SATA1~4: SATA 6Gb/s Anschlüsse
- 72 ATX_PWR1, CPU_PWR1: Stromanschlüsse
- 72 JAUD1: Audioanschluss des Frontpanels
- 73 JUSB1: USB 2.0 Anschluss
- 73 JUSB2: USB 3.1 Gen1 Anschluss
- 74 JTPM1: TPM Anschluss
- 74 JCOM1: Serieller Anschluss
- 75 JCI1: Gehäusekontaktanschluss
- 76 CPU_FAN1, SYS_FAN1: Stromanschlüsse für Lüfter
- 77 JBAT1: Clear CMOS Steckbrücke (Reset BIOS)
- 77 EZ Debug LED
- 78 BIOS-Setup
- 78 Öffnen des BIOS Setups
- 79 Reset des BIOS
- 79 Aktualisierung des BIOS
- 80 Softwarebeschreibung
- 80 Installation von Treibern
- 80 Installation von Utilities
- 76 DIMM
- 76 PCIe
- 79 USB 3.1 Gen
- 83 BIOS)
- 84 BIOS