Preparing to Install the Driver. KYOCERA ECOSYS FS-3140MFP, ECOSYS FS-3040MFP+, ECOSYS FS-3640MFP

Installation

Selecting an Installation Method

You can select Express Mode for a network or USB connection and the installation wizard will discover your printers. You can also select Custom

Mode for a network or USB connection and either manually select installation packages and specify utilities or let the installation wizard discover your printer.

Express Mode Installation

Installing in Express Mode on page 1-2

Custom Mode Installation

Installing in Custom Mode with a Network Connection using Discover on page 1-4

Installing in Custom Mode with a USB Connection using Discover on page 1-

5

Installing in Custom Mode with a Network Connection using Custom Select on page 1-7

Installing in Custom Mode with a USB Connection using Custom Select on page 1-8

Installing Utilities

On the Installation Method page, click Utilities to install printer utilities. You can also select utilities to install during the Custom Installation procedure.

Upgrading Driver Components

If the installation wizard detects older driver or utility components, the Software

Component Upgrade page appears.

1 Choose the component to upgrade. Click Next .

2 Confirm your upgrade settings. To start the upgrade, click Upgrade .

3 When the upgrade completes, click Next . The Installation Method page appears.

Express Installation

Express Mode applies to driver installation for a USB or network connection only. The installation wizard discovers printers that are turned on, and connected by USB or network cable. In Custom Mode , you are able to select the installation packages and specify the port.

Installing in Express Mode

This section describes the express installation procedure of the driver software in Windows operating systems.

1 Ensure that your printer and computer are turned on and connected by USB or network cable.

1-2 User Guide