advertisement
CFN III Quick Reference
Printer
Controls
String
&&C;
Effect use condensed print (15 chars. per inch) use normal print (12 chars. per inch) &&N;
&&E;
&&U; use expanded print (7.5 or 6 chars per inch, depending if condensed or normal in effect) use expanded print (return to condensed/normal)
&&L nn ; set margin to nn ( nn is one or two digits)
&&V; text wait for insert, print text on inserted slip (check validation)
The C and N options may be followed by any combination of B or E. B causes the text to be struck twice, giving a bold effect. E puts the print into expanded mode.
Name on Receipt
Track 1 only
The card reader device must support track 1 to use the following characters:
@N prints customer’s name if known. Line prints regardless even if no name found.
@O if found on line with @N, line will not print unless customer name is known.
POS
Reports
Tender Codes
In the following table, a first digit of:
0 = club card
1 = debit checking
3 = credit card
4 = cash
2 = debit savings
Code Tender
5 = unpaid
Code Tender
000 Gasboy club card 331 Trendar
001 Country Energy regional club card
002 Country Energy local club card
003 CITGO Fleet
004
100
200
300
IAES
Debit checking
Debit savings
Bank credit card
332
333
Tesoro
Sinclair Fleet
334 Gascard
335 Amarada-Hess
336 Voyager
337 JCB
338 Gulf
339 Fuelman 302 Wright Express card
303 American Express card
304 VISA card
305 MasterCard
306 Discover card
307 FINA card
308 AMOCO card
340
341
IAES Fleet
Country Mark
342 Southern States
343 Amoco Multi card
344 Amoco Torch
345 Amoco Transi card
309 CITGO Plus card 346 MasterCard Fleet
310 Diamond 347 VISA Fleet
Shamrock card
311 Texaco card 348 Amoco Co Brand
312 Sinclair card 349 API
313 Carte Blanche card 350 Citgo FAMS
314 Diners Club card 351 Gasboy Fleet One
315 customer charge 352 Gasboy Debit
316 employee charge 353 Gasboy Program 1
317 Phillips card 354 Gasboy Program 2
318 Comdata card
319 CCIS card
355 Gasboy Program 3
356 SPS Fleet
320 Coastal card 357 T Chek
321 Buypass Fleet card 358 Shell GO
322 Generic fleet card 365 Citgo PrePaid
323 PHH Fleet Amer card
366 Citgo Black (Plus)
324 CITCO Red card 400 cash
325 CITCO Silver card 401 food stamps
326 Quick Fuel 402 checks
327 Transcash
328 NTS Fuel
403
500 full-serve unpaid
329 TIC
330 EFS
501 Instant-on denial
MDE-4483 CFN III Quick Reference Guide v3.3 · August 2005 Page 34
advertisement
Related manuals
advertisement
Table of contents
- 5 CONTENTS
- 5 Command Summaries, Version
- 21 FRED Command Summary
- 21 System Variables
- 22 CFN3 Backup
- 23 CFN3 CPU Board
- 23 Switches
- 24 Jumpers
- 24 CFN3 Memory Board
- 24 Switches
- 24 Jumpers
- 24 CFN3 Memory Map
- 25 LED Diagnosis
- 25 Serial/Parallel Ports
- 25 CFN3 Ports
- 26 Internal Profit Point setup
- 26 Diagnostic Error Codes
- 26 Console
- 26 Card & Gate Reader
- 26 Pump Control Unit
- 27 Tank Monitor
- 27 Raw Mode Error Codes
- 27 Profit Point
- 27 Back panel
- 27 Scanner
- 28 Menu Tree
- 29 Menu Tree – Profit Point v
- 31 Special functions
- 31 Check Point
- 31 Special Functions
- 32 Product Attributes
- 32 Check Point Key Map
- 33 Check Point Key Actions
- 34 Switch Settings
- 34 CPU Board, Firmware
- 34 Check Point Test Mode
- 34 Configuration
- 35 Vacuum Fluorescent Display
- 36 Standalone Receipt Printer
- 36 Epson
- 36 Self Test
- 36 Star (RS-422)
- 37 Star (RS-232) for CheckPoint
- 37 Star (Parallel)
- 37 Okidata 184/186 Printer Setup
- 37 Settings for serial printer
- 38 Printer Controls
- 38 Name on Receipt Track 1 only
- 38 POS Reports
- 38 Tender Codes
- 39 Event Codes
- 39 Record Identifiers
- 40 Sample Commands
- 40 Link Terminal Setup
- 41 Island Card Reader I
- 41 CPU Board
- 41 Switches
- 41 Jumpers
- 42 Test Mode
- 42 Printers
- 42 Island Card Reader II
- 42 CPU Board
- 42 Switches
- 43 Jumpers
- 43 Test Mode
- 43 Printers
- 43 Keypad
- 44 Switches
- 45 Jumpers
- 45 CRIND
- 45 Keypad
- 46 Cabling
- 46 D-Box to Gilbarco Interface
- 46 SDI/Wayne CAT
- 46 Keypad
- 47 SDI Box Switches
- 47 Insight Interface
- 47 PC Connection
- 47 Insight Board Switches
- 48 Parameter File
- 48 Parameter File Defaults
- 49 Softkey and Animation sequences
- 49 Pump Control Unit
- 49 EXPMUX CPU Board
- 49 Switches
- 50 Jumpers
- 50 CMOS CPU Board
- 50 Switches
- 50 Jumpers
- 51 I/O Board
- 51 Jumpers
- 51 9800 Pump Dispenser
- 51 CPU Board
- 51 Jumpers
- 51 LED Indicators
- 51 Test Points
- 52 Switches
- 52 LCD Board
- 52 Jumpers
- 53 Electronic Pump Interfaces
- 53 Tokheim
- 54 Gilbarco Interface Unit
- 54 CPU Board
- 55 Front Panel LEDs
- 55 Interface Board
- 56 Wayne
- 57 Tank Gauge
- 57 Veeder-Root CPU Board
- 57 TLS 250 and TLS 250i
- 57 TLS 350R
- 58 Gasboy Interface Software
- 58 422/485 Line Monitor
- 58 PC Monitor
- 58 DIP Switch Banks 2 and
- 58 422/485-232 Converter
- 58 Jumpers
- 59 R1 - Adjusting
- 59 Modems and Cables
- 59 PC Package/Answer modem
- 59 Bank Network modem
- 60 CFN3 to Modem
- 60 CFN3 to Okidata
- 60 RS-232 Character Framing
- 60 Print Transaction
- 60 Host-Site Mode
- 60 Completed Transaction Codes
- 60 Site-Host Mode
- 61 Raw Mode
- 61 PC/Site Control
- 61 Required Settings for CFN
- 61 Command Line Options
- 62 Input and Output Redirection
- 62 Fuel Point Reader
- 62 CPU Board
- 62 Switches
- 63 Site Notes