1. Basic Preparation. Psion GM37525MGSM, WORKABOUT PRO M/C

PDF

Documento

Anúncio

1. Basic Preparation

Important: All approval and safety information is outlined in the

‘WORKABOUT PRO Hand-Held Computer User

Manual’ – part number 8000024. This manual is available on our web site www.psionteklogix.com through the Teknet extranet. It is important that you review all safety guidelines before charging a battery or operating a scanner.

This quick start guide provides basic information on the operation and features of the Psion Teklogix WORKABOUT PRO M (Monochrome) and WORKABOUT PRO C (Colour) Hand-Held Computer. For more detailed information, refer to the WORKABOUT PRO

M/C Hand-Held Computer User Manual (PN 8000024) or the documentation supplied with the application you are using.

Typically, WORKABOUT PROs are configured at the factory and arrive ready for use.

1.1 Charging The Battery

Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.

1.2 Installing The Battery

• Turn the fasteners at the base of the battery cover counterclockwise to unlock the cover and remove it. The top of the stylus is shaped to help you loosen the fasteners.

• Insert the charged battery. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.

Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 3

Note: If you are using a docking station, you can insert an uncharged battery, dock the unit and switch it on.

1.3 Switching The Unit On

• Press and hold down the <ENTER/ON> key for at least one second to switch the unit on.

• When the LED flashes green, release <ENTER/ON>.

A splash screen displaying the Psion Teklogix logo and the

Microsoft® Windows CE .NET logo appears followed by the startup desktop.

Note: If the unit was already in use – the unit may be off (suspend state) – pressing <ENTER/ON> ‘wakes’ the unit from this state. The screen in which you were working prior to the suspend state is displayed.