1. Basic Preparation
Important: All approval and safety information is outlined in the
‘WORKABOUT PRO Hand-Held Computer User Manual’
– part number 8000024. This manual is available on our web site www.psionteklogix.com. Open the ‘Products’ menu followed by ‘Hand-Helds’. It is important that you review all safety guidelines before charging a battery or operating a scanner.
This quick start guide provides basic information on the operation and features of the Psion Teklogix WORKABOUT PRO S Hand-
Held Computer. For more detailed information, refer to the WORK-
ABOUT PRO Hand-Held Computer User Manual (PN 8000024) or the documentation supplied with the application you are using.
Typically, WORKABOUT PRO S hand-helds are configured at the factory and arrive ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counterclockwise to unlock the cover and remove it. The top of the stylus is shaped to help you loosen the fasteners.
• Insert the charged battery. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide 11
