1. Basic Preparation
Important: It is important that you review all safety guidelines
described under “Lithium-Ion Battery Safety Precautions” on page 8 before charging a battery.
This quick start guide provides basic information on the operation and features of the Psion Teklogix 7530 G2 Hand-Held Computer.
For more detailed information, refer to the 7530 G2 Hand-Held
Computer User Manual, or the documentation supplied with the application you are using.
Typically, 7530 G2 hand-helds are configured at the factory and arrive ready for use. Although the 7530 G2 is equipped with an internal Compact Flash and SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.
Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide 17
