Scanner Window
Battery Pack
Tether Port
Docking Port
2.2 The Battery
The 7530 G2 hand-held operates with a Lithium-Ion battery pack.
Preparing the hand-held unit for operation requires that a battery pack be charged and installed in the unit.
Important: Before charging or using the battery pack, it is criti-
cal that the safety information on page 8 be reviewed
and that all warnings are strictly followed.
2.2.1 Battery Swap And Runtime
Important: Always switch the unit off before changing the battery. While the battery is being replaced, the 7530 G2 will save its current data for at least 20 minutes.
The 7530 G2 battery will operate for ten hours under typical operating conditions after a full charge. Typical battery life is 300 cycles or
2 years average use. A full charge is completed in 4 hours with a typical charge time of 1.5 hours.
24 Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide
