Factory Default Settings. Netgear EX3800 - AC750 WiFi Range Extender, EX3700, AC750 WiF, EX3700-100PES, Répéteur WiFi, EX3800-100PES AC750

Factory Default Settings

To reset the extender to factory default settings, you can use either the Factory Reset button on the rear panel or you can log in and click the onscreen RESET button. For more information, see

Return the Extender to Its Factory Default Settings on page 37.

The following table shows the factory default settings.

Table 2. Factory default settings

Feature

Smart Setup

WiFi communication

WiFi network name (SSID)

Default Settings

Enabled

Enabled

NETGEAR_EXT

Disabled

Auto 1

Security

Transmission speed

Country/region

Operating mode

Data rate in the 2.4 GHz band

Data rate in the 5 GHz band

Varies by region

802.11a/b/g/n/ac

54/145/300 Mbps

54/145/300/433 Mbps

DHCP Client enabled

1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.

Factory Settings and Technical Specifications

46