Confi guring Date/Time Settings. Orion 46FBT981 100Hz

Hard Disk Info

To view the details about the USB disk, highlight Hard

Disk Info by using “ ” or “ ” key and press OK . USB disk information will be displayed:

Confi guring Date/Time Settings

Select Date/Time in the Settings menu to confi gure

Date/Time settings. Press OK button.

• Select Sources in the Settings menu and press

OK button.

• Press“ ” or “ ” buttons to select a source.

• Use “ ” or “ ” button to enable or disable the selected source. Changes are automatically stored.

Confi guring Other Settings

To view general confi guration preferences, select

Other Settings in the Settings menu and press OK button.

• Use “ ” or “ ” buttons to highlight Date / Time.

Date, Time, Time Settings Mode and Time Zone

Setting will be available.

Use “ ” or “ ” buttons to highlight the Time Settings

Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered:

• By pressing “ ” or “ ” buttons select Time Zone.

Use “ ” or “ ” buttons to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone.

• Changes are automatically stored. Press “MENU” to exit.

Confi guring Source Settings

You can enables or disable selected source options.

The TV will not switch to the disabled source options when “SOURCE” button is pressed.

Operation

• Press “ ” or “ ” buttons to select an item.

• Use “ ” or “ ” button to set an option.

• Press OK button to view a sub-menu.

Menu Timeout : Changes timeout duration for menu screens.

Scan Encrypted Channels : When this setting is set as YES , search process will locate the encrypted channels as well. If it is set as NO , encrypted channels will not be located in automatic search or manual search.

Blue Background : Activates or deactivates blue background system when the signal is weak or absent.

Software Upgrade : To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please ensure that the TV is set to standby mode.

You can enable or disable automatic upgrade by setting Automatic Scanning option.

You can manually search for new software by selecting Scan for upgrade .

English - 28 -

01_MB65_[GB]_DVB_TC_PVR_PLATINIUM7_1900UK_46981WLED_10078060_50213946.indd 28 01.02.2012 17:07:01