ANI-IN-SDI & ANI-OUT-SDI. A-Neu Video ANI-MOD Series, ANI-MOD3232, ANI-MOD88
Add to My manuals29 Pages
advertisement
CHANGEABLE CARDS
SDI Card.
These cards are compatible with various different SDI signal formats, including SD/HD/3G-SDI (adaptive)
Every port has looping output for local monitoring.
ANI-IN-SDI:
Is an input card which accepts a maximum of four separate SDI input signals. Input signal can be passed to output device through ANI-OUT-SDI, or passed through other output cards in the series. This card is unique when compared to the other input cards in that it provides a “through” connection for daisy-chainging video devices. Each input signal can be immediately sent back out (“looping” it), without switching capability, to go to individual monitors.
ANI-OUT-SDI:
Is an output card which provides a maximum of four separate SDI output signals. Input signals can come from an ANI-IN-SDI, or from other kinds of input cards in the series.
The BNC connector is shown as the fi gure below.
13
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 4 About Modular Matrix Switcher System
- 4 ANI-MOD signal card (changeable cards)
- 4 Package Contents
- 5 cations
- 5 Main Unit
- 5 Changeable Cards
- 5 ANI-IN-DVI & ANI-OUT-DVI
- 6 ANI-IN-HDMI & ANI-OUT-HDMI
- 6 ANI-IN-VGA & ANI-OUT-VGA
- 6 ANI-IN-SDI & ANI-OUT-SDI
- 7 ANI-IN-HDBaseT & ANI-OUT-HDBaseT
- 8 Front Panel Operation
- 10 External Connection
- 11 Introduction of the Input and Output Connectors
- 12 Changeable Cards Introduction & Installation
- 12 ANI-IN-DVI & ANI-OUT-DVI
- 13 ANI-IN-HDMI & ANI-OUT-HDMI
- 14 ANI-IN-VGA & ANI-OUT-VGA
- 15 ANI-IN-SDI & ANI-OUT-SDI
- 16 ANI-IN-HDBaseT & ANI-OUT-HDBaseT
- 17 Connection of RS-232 Communication Port
- 17 Connection with Computer
- 17 Connection of TCP/IP Port (Optional Function)
- 18 System Diagram
- 19 Remote Control
- 21 Command Codes
- 22 Communication Protocol Command and Command Codes
- 23 GUI Interface
- 25 TCP/IP Control
- 28 Safety Operation Guide
- 28 Troubleshooting & Maintenance