2.4.2 Optional items. SEPTENTRIO AsteRx-U

2.4. SHIPPING CASE CONTENTS

2.4.2 Optional items

The following items with their part numbers can be optionally purchased for use with the

AsteRx-U.

15

3 Quick start

This section details how to power-up, connect to and communicate with the AsteRx-U. The

AsteRx-U has an on-board web interface which the user can connect to in three ways:

Ethernet, USB or WiFi. The AsteRx-U is fully configurable using the web interface. Please note that older versions of certain browsers may not display properly on the web interface.

3.1 Powering the AsteRx-U

Using the supplied open-ended power cable, the receiver can be powered by applying 6 to 36 V via the power-in wire. The receiver can also be powered using the power adapter

(optionally available). The power socket is indicated in Figure 3-1.

Figure 3-1: Rear panel power socket

There is a power button on the front panel as shown in Figure 3-2 which you may also have to press. If the AsteRx-U loses power while the power button is on, then it will automatically boot up when power is restored.

Figure 3-2: Front panel power button

When the unit is powered initially, the front-panel LEDs will will follow a boot sequence pattern.

16