advertisement
▼
Scroll to page 2
of
84
9.1.5 COM1/COM3/Host USB
9.1. REAR-PANEL PORT DESCRIPTIONS
Figure 9-5: 14-pin female socket pin-numbering guide as viewed end on. Start counting at pin indicated by bold semi-circle and follow the line in an anti-clockwise direction. This socket can be paired with a LEMO multipole male connector of type
1B.
The USB Host feature will only become fully functional in later firmware versions.
7
8
9
10
11
12
13
14
4
5
6
2
3
PIN # Name
1 USBH_VB
USBH_DP
USBH_DM not connected
Tx3
Rx3 not connected
Rx1 not connected
Tx1
Ground not connected not connected
Ground
Comment reserved reserved reserved
Serial COM 3 transmit line
Serial COM 3 receive line
Serial COM 1 receive line
Serial COM 1 transmit line
82
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 5 1.1.1 CE Notice
- 5 1.1.2 ROHS/WEEE Notice
- 5 1.1.3 Safety information
- 6 1.1.4 Support
- 7 2.1.1 GNSS
- 9 2.1.2 Physical and Environmental
- 10 2.3.1 Front panel
- 11 2.3.2 LED description
- 12 2.3.3 Rear panel
- 12 2.3.4 SIM card slot
- 13 2.3.5 Mounting brackets
- 13 2.3.6 Internal memory
- 14 2.4.1 Supplied as standard
- 15 2.4.2 Optional items
- 17 3.3.1 Using the USB cable
- 19 3.3.2 Using the Ethernet cable
- 20 3.3.3 Over WiFi
- 21 3.4.1 Output over a serial COM connection
- 25 3.4.2 Output over Ethernet
- 28 3.4.3 Output over bluetooth
- 35 modem and NTRIP
- 39 closed network
- 52 4.4.1 Time synchronisation using the PPS signal
- 63 6.2.1 Narrowband interference mitigation
- 64 6.2.2 Wideband interference mitigation
- 79 8.3.1 Using SSH key authentication
- 80 9.1.1 PWR
- 80 9.1.2 PPS/GPO
- 81 9.1.3 Event/GP
- 81 9.1.4 COM
- 82 9.1.5 COM1/COM3/Host USB
- 83 9.1.6 Ethernet/USB