Skład zestawu. Nowsonic Stage Extender 313806


Add to My manuals
56 Pages

advertisement

Skład zestawu. Nowsonic Stage Extender 313806 | Manualzz

PL

Stage Extender

Instrukcja obsługi www.nowsonic.com

Skład zestawu

Nowsonic Stage Extender

2 anteny

Instrukcja obsługi (niniejszy dokument)

Kabel USB, Typ A / Typ B Micro

Zasilacz (100 - 240V; 50/60Hz 0,4A; wyjście 5V; 2.000 mA)

Następujące opcje są osobno dostępne:

Nowsonic Stage Router

Nowsonic Stage Router Pro

Zestaw anten estradowych Nowsonic Stage Antenna Set 2,4 GHz

Zestaw anten estradowych Nowsonic Stage Antenna Set 5,0 GHz

Serwis

W przypadku wystąpienia jakichkolwiek problemów lub pytań natury technicznej, prosimy zwrócić się w pierwszej kolejności do lokalnego sprzedawcy, u którego urządzenie zostało zakupione.

W przypadku naprawy serwisowej, prosimy zwrócić się również do lokalnego sprzedawcy. W innym przypadku prosimy o skontaktowanie się bezpośrednio z nami. Nasze dane kontaktowe znajdziesz na naszej stronie internetowej www.nowsonic.com

.

Zastrzeżenia prawne

Prawa autorskie do niniejszego podręcznika użytkownika © 2017: Nowsonic

Cechy produktu, specyfikacja i dostępność mogą ulec zmianie bez wcześniejszej zapowiedzi.

Wydanie w. 1.0, 02/2017

52

Nowsonic_StageExtender.indb 52 08.03.17 16:20

Environmental Conditions:

Working Temperature -20 ~ 45 ℃

Working humidity 65+/-20%RH

Hereby, CMG Global Limited declares that this Nowsonic Stage Extender/ 313806 , is In compliance with the essential Requirements and other relevant provisions of Directive 1999/5/EC.

The AC plug considered as disconnect device of adapter.

I/P AC 100-240V, 50/60Hz, 0.4A DC 5V, 2A

Environment friendly disposal you can help protect the environment

Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal centre.

The RF distance between body and the product is 20cm

Nowsonic_StageExtender.indb 53 08.03.17 16:20

FCC Caution:

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.

Such modifications or change could void the user’s authority to operate the equipment.

This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement.

To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of

20cm between the radiator and your body.

5G

Any emission is maintained within the band of operation under all conditions of normal operation. The max. frequency stability is less than 20ppm.

Nowsonic_StageExtender.indb 54 08.03.17 16:20

Nowsonic_StageExtender.indb 55 08.03.17 16:20

Distributed by Sound Service GmbH www.nowsonic.com

WEEE-Reg.-Nr.: DE 18189133

Nowsonic_StageExtender.indb 56 08.03.17 16:20

advertisement

Related manuals

advertisement

Table of contents