I/O Outlets. AXIOMTEK NA347

NA347 User’s Manual

1.5 I/O Outlets

Locate front and rear panel I/O outlets on the NA347 Series server to connect serial and

Ethernet interface devices.

LAN ports USB 3.0 HDMI

Power Button

Console DC Jack

NOTE: Please visit Axiometk Support Page and enter the product category to download the sample code package.

Introduction 5

NA347 User’s Manual



Active LED (Single color) for LAN port #1, port#2, port#3, port#4

1.

The orange LED is on when the LAN port connection is working.

2.

The LED flashes when transmitting or receiving any signals to or from the appliance.

3.

The LED is dark when the appliance is off.



Link LED for LAN port #1, port#2, port#3

1.

The double-color LED light indicates 10/100/1000Mbps transfer rate.

2.

When the amber-color LED light is radiating, it should be 1000Mbps transfer rate at this moment.

3.

When the green-color LED light is radiating, it should be 100Mbps transfer rate at this moment

4.

If the LED is dark and Link/Active LED is light on or flashing, it should be 10Mbps transfer rate.

5.

When this LED and Link/Active LED both are dark. No networking devices are attached

Transfer Rate LED Light Color

10Mbps

100Mbps

1000Mbps

Dark

Green

Amber

6 Introduction