E.2 Basic Parameter Settings
E.2 Basic Parameter Settings
Use the following tables to keep records of important parameters. Have this data available when contacting Yaskawa technical support.
u
Basic Setup
Item
Control Mode A1-02 =
Normal/Heavy Duty Selection C6-01 =
Frequency Reference Source b1-01 =
Run Command Source b1-02 =
Setting Value Memo u
V/f Pattern Setup
Item
V/f Pattern Selection
Max. Output Frequency
Max. Voltage
Base Frequency
E1-03 =
E1-04 =
E1-05 =
E1-06 =
Mid. Output Frequency E1-07 =
Mid. Output Frequency Volt.
E1-08 =
Min. Output Frequency E1-09 =
Min. Output Frequency Volt.
E1-10 =
Setting Value u
Motor Setup
Motor Type
Induction
Permanent
Magnet
Item
Motor Rated Current
Setting Value
E2-01 =
Motor Rated Slip E2-02 =
Motor No-Load Current E2-03 =
No. of Motor Poles E2-04 =
Line-to-Line Resistance E2-05 =
Motor Leakage
Inductance
Motor Code Selection
Motor Rated Power
Motor Rated Current
E2-06 =
E5-01 =
E5-02 =
E5-03 =
No. of Motor Poles E5-04 =
Motor Stator Resistance E5-05 =
Motor d-Axis Inductance E5-06 =
Motor q-Axis Inductance E5-07 =
Induction Volt. Const. 1 E5-09 =
Encoder Z-pulse Offset E5-11 =
Induction Volt. Const. 2 E5-24 =
Memo
Memo
774 YASKAWA ELECTRIC SIEP C710616 41G YASKAWA AC Drive – A1000 Technical Manual
