STM32F102x8, STM32F102xB Description
The temperature sensor has to generate a a voltage that varies linearly with temperature.
The conversion range is between 2 V < V
DDA
< 3.6 V. The temperature sensor is internally connected to the ADC_IN16 input channel, which is used to convert the sensor output voltage into a digital value.
The Arm ® SWJ-DP Interface is embedded, and is a combined JTAG and serial wire debug port that enables either a serial wire debug or a JTAG probe to be connected to the target.
The JTAG TMS and TCK pins are shared respectively with SWDIO and SWCLK and a specific sequence on the TMS pin is used to switch between JTAG-DP and SW-DP.
DS5933 Rev 7
19/81
68
