DC-OK Relay Contact. Puls CP20.245-R2

CP-Series

CP20.245-R2

24V, 20A, S INGLE P HASE I NPUT

8.

DC-OK R

ELAY

C

ONTACT

This feature monitors the output voltage of the power supply in front of the decoupling device (see also chapter 11).

Contact closes

Contact opens

Contact ratings

Isolation voltage

As soon as the output voltage reaches typ. 22Vdc.

As soon as the output voltage dips below 22Vdc.

Short dips will be extended to a signal length of 100ms. Dips shorter than 1ms will be ignored. max. min.

60Vdc 0.3A, 30Vdc 1A, 30Vac 0.5A

1mA at 5Vdc

See dielectric strength table in chapter 19.

Resistive load

Min. permissible load

Fig. 8-1 DC-ok relay contact behavior

22Vdc

<

1ms

>

1ms 100ms open closed open closed

Jun. 2020 / Rev 1.0 DS-CP20.245-R2 EN

All parameters are typ. values specified at 24.1V, 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone +49 89 9278 0 Germany

8/28