Removing SFP Modules. Advantech EKI-7428G-4CA, EKI-7428G-4CI, EKI-7428G-4CPI, EKI-7428G-4X, EKI-7428G-4XP

2.6.2

Removing SFP Modules

To disconnect an LC connector, use the following guidelines:

1.

Press down and hold the locking clips on the upper side of the optic cable.

2.

Pull the optic cable out to release it from the transceiver.

Figure 2.6 Removing a Fiber Optic Cable to a Transceiver

3.

Hold the handle on the transceiver and pull the transceiver out of the slot.

Handle

Figure 2.7 Removing an SFP Transceiver

Note!

Replace the dust plug on the slot if you are not installing a transceiver.

The dust plug protects hardware from dust contamination.

EKI-7428 Series User Manual 14