4.10.2 Ping Test. Advantech EKI-7428G-4CA, EKI-7428G-4CI, EKI-7428G-4CPI, EKI-7428G-4X, EKI-7428G-4XP
Add to My manuals159 Pages
advertisement
![4.10.2 Ping Test. Advantech EKI-7428G-4CA, EKI-7428G-4CI, EKI-7428G-4CPI, EKI-7428G-4X, EKI-7428G-4XP | Manualzz 4.10.2 Ping Test. Advantech EKI-7428G-4CA, EKI-7428G-4CI, EKI-7428G-4CPI, EKI-7428G-4X, EKI-7428G-4XP | Manualzz](http://s3.manualzz.com/store/data/064997248_1-1aeef578cc8859af5e90e0e908f5a383-360x466.png)
The following table describes the items in the previous figure.
Item
Port
Description
Click the drop-down menu to select a pre-defined port for diagnostic testing. Giga ports are displayed with a channel A to D designation.
Click Copper Test to display the test result for the selected port.
Copper Test
The ensuing table for Test Result settings are informational only: Port, Channel A,
Cable Length A, Channel B, Cable Length B, Channel C, Cable Length C, Channel D and Cable Length D.
4.10.2
Ping Test
The Ping Test page allows you to configure the test log page.
To access this page, click Diagnostics > Ping Test .
Figure 4.125 Diagnostics > Ping Test
The following table describes the items in the previous figure.
Item
IP Address
Count
Interval (in sec)
Description
Enter the IP address or host name of the station to ping. The initial value is blank. The IP Address or host name you enter is not retained across a power cycle. Host names are composed of series of labels concatenated with periods. Each label must be between 1 and 63 characters long, maximum of 64 characters.
Enter the number of echo requests to send. The default value is 4.
The value ranges from 1 to 5. The count entered is not retained across a power cycle.
Enter the interval between ping packets in seconds. The default value is 1. The value ranges from 1 to 5. The interval entered is not retained across a power cycle.
EKI-7428 Series User Manual 114
advertisement
Related manuals
advertisement
Table of contents
- 15 Specifications
- 16 Hardware Views
- 16 Front View
- 18 Rear View
- 19 Dimensions
- 21 Warnings
- 23 Installation Guidelines
- 23 Environment and Enclosure Guidelines
- 23 Connecting Hardware
- 24 Verifying Switch Operation
- 24 Installing the Switch
- 24 Rack-Mounting
- 25 Installing and Removing SFP Modules
- 25 Installing SFP Modules
- 27 Removing SFP Modules
- 28 Connecting the Switch to Ethernet Ports
- 28 RJ45 Ethernet Cable Wiring
- 29 Connecting the Switch to Console Port
- 30 Power Supply Installation
- 30 Overview
- 31 Considerations
- 31 Grounding the Device
- 32 Wiring a Relay Contact
- 33 Wiring the Power Inputs
- 34 Reset Button
- 36 First Time Setup
- 36 Overview
- 36 Introduction
- 36 Administrative Interface Access
- 39 Command Line Interface Configuration
- 39 Introduction to Command-Line Interface (CLI)
- 39 Accessing the CLI
- 40 Web Browser Configuration
- 40 Preparing for Web Configuration
- 40 System Login
- 42 Log In
- 42 Recommended Practices
- 42 Changing Default Password
- 43 Monitoring
- 43 Device Information
- 44 Logging Message
- 45 Port Monitoring
- 46 Link Aggregation
- 46 LLDP Statistics
- 47 IGMP Statistics
- 48 System
- 48 IP Settings
- 49 DHCP Client Option
- 50 DHCP Auto Provision
- 50 IPv6 Settings
- 51 Management VLAN
- 51 System Time
- 53 L2 Switching
- 53 Port Configuration
- 54 Port Mirror
- 55 Link Aggregation
- 58 802.1Q VLAN
- 61 Q-in-Q
- 64 802.3az EEE
- 66 Multicast
- 70 Jumbo Frame
- 71 4.5.10 Spanning Tree
- 76 4.5.11 X-Ring Elite
- 77 4.5.12 X-Ring Pro
- 79 4.5.13 Loopback Detection
- 80 4.5.14 CFM
- 81 4.5.15 ERPS
- 83 MAC Address Table
- 83 Static MAC
- 83 MAC Aging Time
- 84 Dynamic Forwarding Table
- 85 Security
- 85 Storm Control
- 87 Port Security
- 87 Protected Ports
- 88 DoS Prevention
- 90 Applications
- 92 802.1x
- 93 IP Security
- 95 Access Control List
- 97 IP Source Guard
- 98 4.7.10 DHCP Snooping
- 99 4.7.11 ARP Spoofing
- 100 General
- 105 QoS Basic Mode
- 106 Rate Limit
- 108 Bandwidth Guarantee
- 109 Management
- 114 Power Over Ethernet
- 116 TCP Modbus
- 116 DHCP Server
- 121 SMTP Client
- 126 Diagnostics
- 126 4.10.1 Cable Diagnostics
- 127 4.10.2 Ping Test
- 128 4.10.3 IPv6 Ping Test
- 129 4.10.4 System Log
- 131 4.10.5 DDM
- 132 Tools
- 137 Modbus/TCP Mapping
- 157 Troubleshooting