Port Monitoring. Advantech EKI-7428G-4CA, EKI-7428G-4CI, EKI-7428G-4CPI, EKI-7428G-4X, EKI-7428G-4XP

Item

Category

View

Description

Click the drop-down menu to select the category level target setting.

Click View to display all Logging Information and Logging Message information.

Click Refresh to update the screen.

Click Clear buffered messages to clear the logging buffer history list.

Refresh

Clear buffered messages

The ensuing table for Logging Information table settings are informational only:

Target, Severity and Category.

The ensuing table for Logging Message table settings are informational only: No.,

Time Stamp, Category, Severity and Message.

4.3.3

Port Monitoring

Port Network Monitor is a bandwidth and network monitoring tool for the purpose of capturing network traffic and measuring of network throughput. The monitoring functionality includes listing of port statistics as well as port utilization.

4.3.3.1

Port Statistics

To access this page, click Monitoring > Port Monitoring > Port Statistics .

Figure 4.5 Monitoring > Port Monitoring > Port Statistics

The following table describes the items in the previous figure.

Item

Port

Description

Click the drop-down menu to select a port and its captured statistical setting values.

Click Clear to clear the counter selections.

Clear

The ensuing table for IF MIB Counters settings are informational only: ifInOctets, ifInUcastPkts, ifInNUcastPkts, ifInDiscards, ifOutOctets, ifOutUcastPkts, ifOutNUcastPkts, ifOutDiscards, ifInMulticastPkts, ifInBroadcastPkts, ifOutMulticastPkts and ifOutBroadcastPkts.

The ensuing table for Ether-Like MIB Counters settings are informational only: dot3StatsAlignmentErrors, dot3StatsFCSErrors, dot3StatsSingleCollisionFrames, dot3StatsMultipleCollisionFrames, dot3StatsDeferredTransmissions, dot3StatsLateCollisions, dot3StatsExcessiveCollisions, dot3StatsFrameTooLongs, dot3StatsSymbolErrors, dot3ControlInUnknownOpcodes, dot3InPauseFrames and dot3OutPauseFrames.

The ensuing table for Rmon MIB Counters settings are informational only: etherStatsDropEvents, etherStatsOctets, etherStatsPkts, etherStatsBroadcastPkts, etherStatsMulticastPkts, etherStatsCRCAlignErrors, etherStatsUnderSizePkts, etherStatsOverSizePkts, etherStatsFragments, etherStatsJabbers, etherStatsCollisions, etherStatsPkts64Octets, etherStatsPkts65to127Octets, etherStatsPkts128to255Octets, etherStatsPkts256to511Octets, etherStatsPkts512to1023Octets and etherStatsPkts1024to1518Octets.

EKI-7428 Series User Manual 32