Cut out. Miele CS1028GSS

Installation

Cut out

^

Make the countertop cut-out for one or more appliances as applicable.

Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the hob.

See "IMPORTANT SAFETY

INSTRUCTIONS".

^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture.

The materials used must be heat-resistant.

If during installation the seal around the frame does not sit flush with the countertop in the corners, the corner radius, maximum

3

/

16

" (4 mm), can be carefully filed down to fit.

27