advertisement
Installation
Installation of multiple appliances
When installing more than one combiset appliance, a support bar b must be installed between the appliances.
Countertop cut-out two appliances
Countertop cut-out three appliances
For the installation of two appliances the width of the countertop cut-out D is the sum of A and C.
For the installation of three appliances the width of the countertop cut-out D is the sum of A and B and C.
A , B and C = appliance width
11 5/16", 15" or 22 11/16"
(288 mm, 380 mm or 576 mm) minus 5/16" (8 mm) to allow for the overhang
D = width of the countertop cut-out
If more than three appliances are being installed, you will need to add,
A, B or C for each additional appliance.
28
Installation
Sample calculations for a countertop cut-out for three appliances
A appliance width minus 5/16"
(8 mm)
B appliance width
11" (280 mm) 11 5/16" (288 mm)
11" (280 mm) 15" (380 mm)
C appliance width minus 5/16"
(8 mm)
11" (280 mm)
14 5/8" (372 mm)
D
Countertop cut-out
33 3/8" (848 mm)
40 5/8" (1032 mm)
11" (280 mm) 22 11/16" (576 mm) 22 3/8" (568 mm) 56 1/16" (1424 mm)
14 5/8" (372 mm) 11 5/16" (288 mm)
14 5/8" (372 mm) 15" (380 mm)
11" (280 mm)
14 5/8" (372 mm)
37" (940 mm)
44 1/4" (1124 mm)
14 5/8" (372 mm) 22 11/16" (576 mm) 22 3/8' (568 mm) 59 11/16" (1516 mm)
22 3/8" (568 mm) 11 5/16" (288 mm)
22 3/8" (568 mm) 15" (380 mm)
22 3/8" (568 mm) -
11" (280 mm)
14 5/8" (372 mm)
44 3/4" (1136 mm)
52" (1320 mm)
22 3/8" (568 mm) 44 3/4" (1136 mm)
29
Installation a
Spring clips b Support bars c
Space between support bar and countertop d
Sealing strip
The illustration represents the attachment of spring clips a and support bars b for 3 appliances.
An additional support bar is required for each additional appliance. The position for attachment of an additional support bar depends on the width of appliance B .
30
advertisement
Related manuals
advertisement