Advanced. D-Link DCS-5605/5635

Section 3 - Configuration

Advanced

ICR

You may configure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light environments.

Automatic: The Day/Night mode is set automatically.

Generally, the camera uses Day mode and switches to Night mode when needed.

Day Mode: Day mode enables the IR Cut Filter.

Night Mode: Night mode disables the IR Cut Filter.

Schedule Mode: Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to

Night mode at the ending time.

Note : When you enable the “Night

Mode”, the live video will be changed to Black/White mode.

D-Link DCS-5605/5635 User Manual 62

Section 3 - Configuration

Digital Output

This screen allows you to enable the Digital Out (D/O) port, and allows you to select what events will trigger the Digital

Out signal.

Enable D/O: Check this box to enable the D/O port.

Motion Detection: When checked, the D/O port will send a signal whenever motion is detected by the camera.

(When motion detection has been enabled)

D/I: When checked, the D/O port will send a signal whenever a signal is detected on the Digital

In (D/I) port.

D-Link DCS-5605/5635 User Manual 63