Security Code. Clarity 420

8

Getting Started

CHOOSING A LOCATION

1. This phone requires a modular phone

jack (RJ11C) and a standard 120V

AC wall outlet.

2. Plug the AC Adapter directly

into outlet.

3. Do not plug other appliances into the

same outlet or have outlet controlled

by a wall switch.

4. Choose a location that is out of the

way of normal activities.

CAUTION: USE ONLY WITH CLASS 2

POWER SOURCE 9V DC, 400mA.

Always connect the AC Adapter to the phone before you connect it to the AC power.

When you finish, disconnect the AC power before you disconnect it from the phone.

INSTALLATION

Connecting Your Telephone

Carefully remove your cordless telephone from it’s box. If there is any visible damage, do not attempt to operate this equipment.

Return it to the place of purchase.

Check to be sure that you have all items that come with your telephone. You should have a

HANDSET, BASE UNIT, AC ADAPTER, TELE-

PHONE LINE CORD AND OWNERS

MANUAL.

A BATTERY

is also included and is located in the battery compartment.

USE ONLY WITH CLASS TWO

POWER SOURCE

PULSE/TONE BOOST

ON/OFF

9VDC

500mA

TEL

Diagram A:

Table/Desktop Installation

If at any time you have questions about your telephone please contact our Customer

Service Department at: 1-800-552-3368 or

423-622-7793.

Table/Desktop Installation

1. Plug one end of the supplied modular

telephone line cord into the jack marked

TEL

located on the back of the telephone

base as shown in Diagram A.

2. Plug the modular telephone line cord’s

other end into a modular phone jack.

3. Insert the supplied AC Adapter’s plug

into the jack marked 9V DC 400mA

located on the back of the telephone

base.

4. Plug the adapter into a standard

120V AC power (electrical) outlet.

5. Lift the base’s antenna to a vertical

position.