HDBaseT Receiver Panel. ALFAtron ALF- MUH44E

Alfatron ALF-MUH44E

5.2

HDBaseT Receiver Panel

No.

1

Name Function Description

Power LED Red LED will be on when the receiver is powered on.

2 SERVICE port Firmware update port.

3 DC 24V

DC 24V/1A power supply input port.

Note: The Matrix supports POC function, which means that either transmitter or receiver is powered on by 24V/1A power adapter, the other one does not need a power supply.

4 HDBT IN

5

6

Data Signal

Indicator

7 HDMI OUT

8 AUDIO OUT

9

Connection

Signal

Indicator lamp

IR IN

RJ45 connector for connecting the HDBT OUTPUT port of

Matrix with a CAT cable.

▪ Illuminating: Matrix and Receiver are in good connection status.

▪ Flashing: Matrix and Receiver are in poor connection status.

▪ Dark: Matrix and Receiver are not connected.

▪ Illuminating: HDMI signal with HDCP.

▪ Flashing: HDMI signal without HDCP.

▪ Dark: No HDMI signal.

HDMI output port, connect to HDMI display device such as a TV or monitor with HDMI cable.

Analog audio output port. The audio is extracted from HDMI signal.

Connect to IR receiver cable, the IR receive signal will emit to the “IR OUT” port of the Matrix .

10 IR OUT

Connect to IR blaster cable, the IR emit signal is from the “IR IN” port of the Matrix .

11 RS-232

Connect to a PC or control system with a 3-pin phoenix connector cable to transmit command between the Matrix and HDBaseT

Receiver.

- 6 / 28 -