- Home
- Do-It-Yourself tools
- Power tools
- Power fine-spray systems
- Graco
- 309457E - PRO Auto Xs Air Spray Gun, Electrostatic, for Waterborne Coatings
- Owner's manual
Accessories. Graco 309457E - PRO Auto Xs Air Spray Gun, Electrostatic, for Waterborne Coatings
Add to My manuals64 Pages
advertisement
Accessories
Accessories
Air Line Accessories
Grounded Air Hose (Red Cover)
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) left-hand thread; red cover with stainless steel braid ground path.
235068
235069
235070
235071
6 ft (1.8 m)
15 ft (4.6 m)
25 ft (7.6 m)
36 ft (11 m)
235072
235073
50 ft (15 m)
75 ft (23 m)
235074 100 ft (30.5 m)
Bleed-Type Master Air Valve
300 psi (21 bar, 2.1 MPa) Maximum Working Pressure
Relieves air trapped in the air line between this valve and the pump air motor when closed.
107141 3/4 npt
Air Line Shutoff Valve
150 psi (10 bar, 1.0 MPa) Maximum Working Pressure
For turning air to gun on or off.
224754 1/4 npsm(m) x 1/4 npsm(f) left-hand thread.
Fluid Line Accessories
Shielded Waterborne Fluid Hose
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
PTFE; 1/4 in. (6 mm) ID
245327
245328
25 ft (7.6 m)
36 ft (11 m)
Unshielded Waterborne Fluid Hose
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
PTFE; 1/4 in. (6 mm) ID. See manual 308688 for installation requirements.
245329
245330
25 ft (7.6 m)
36 ft (11 m)
Fluid Shutoff/Drain Valve
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
For turning fluid on or off to the gun and for relieving fluid line pressure at the pump.
208630
Drain Valve
1/2 npt(m) x 3/8 npt(f); carbon steel and
PTFE; for non-corrosive fluids
300 psi (21 bar, 2.1 MPa) Maximum Working Pressure
236853 Mounts directly to gun manifold for faster flushing and color changes. Must be used with 233676 Fluid Recirculation Kit.
309457E 59
advertisement
Related manuals
advertisement
Table of contents
- 3 Symbols
- 3 Warning Symbol
- 3 Caution Symbol
- 4 Warning
- 6 Warning
- 7 Introduction
- 7 How the Electrostatic Air Spray Gun Works
- 7 Spraying Waterborne Fluids Electrostatically
- 7 Gun Features and Options
- 8 Operating the Spray Function
- 8 Operating the Electrostatics
- 8 Changing the kV Setting
- 10 Installation
- 10 Install the System
- 11 Warning Signs
- 11 Ventilate the Spray Booth
- 13 Install the Air Line Accessories
- 13 Install the Gun and Mounting Bracket
- 14 Connect the Air Line
- 15 Manifold Connections
- 16 Connect the Waterborne Fluid Hose
- 19 Optional Fiber Optic Cable Connection
- 20 Grounding
- 21 Check Electrical Grounding
- 22 Install the Fabric Cover
- 23 Operation
- 23 Fluid Voltage Discharge and Grounding Procedure
- 24 Pressure Relief Procedure
- 24 Operating Checklist
- 25 Select a Fluid Nozzle and Air Cap
- 26 Adjust the Spray Pattern
- 28 Adjust the Electrostatics
- 29 Spraying
- 29 Triggering the Fluid Alone
- 29 Shutdown
- 30 Maintenance
- 30 Daily Care and Cleaning
- 32 Clean the Air Cap and Fluid Nozzle
- 33 Check for Fluid Leakage
- 34 Electrical Tests
- 34 Test Gun Resistance
- 35 Test Power Supply Resistance
- 36 Test Electrode Resistance
- 37 Troubleshooting
- 37 Voltage Loss Troubleshooting
- 40 Spray Pattern Troubleshooting
- 41 Gun Operation Troubleshooting
- 42 Electrical Troubleshooting
- 43 Repair
- 43 Prepare the Gun for Service
- 44 Remove the Gun from the Manifold
- 44 Install the Gun on the Manifold
- 45 Air Cap/Nozzle Replacement
- 46 Electrode Replacement
- 47 Fluid Packing Removal
- 48 Packing Rod Repair
- 49 Piston Repair
- 50 Adjust the Actuator Arm
- 51 Barrel Removal
- 52 Barrel Installation
- 53 Power Supply Removal and Replacement
- 54 Turbine Alternator Removal and Replacement
- 55 Parts
- 59 Accessories
- 59 Air Line Accessories
- 59 Fluid Line Accessories
- 60 Miscellaneous Accessories
- 61 Gun Accessories
- 62 Technical Data
- 64 Graco Standard Warranty
- 64 Graco Information