- Home
- Do-It-Yourself tools
- Power tools
- Power fine-spray systems
- Graco
- 309457E - PRO Auto Xs Air Spray Gun, Electrostatic, for Waterborne Coatings
- Owner's manual
Gun Accessories. Graco 309457E - PRO Auto Xs Air Spray Gun, Electrostatic, for Waterborne Coatings
Add to My manuals64 Pages
advertisement
▼
Scroll to page 2
of
64
Accessories
Gun Accessories
Round Pattern Kits
Consists of fluid tip, diffuser and air cap.
245217
245219
4-6 in. (102-152 mm) diameter
8-10 in. (203-254 mm) diameter
Dielectric Grease
116553 1 oz (28 g) tube of dielectric grease for the power supply o-ring (12a), some packing rod parts (8), and certain fluid fittings.
Gun Valve Lubricant
111265 4 oz (113 g) tube of sanitary (non-silicone) lubricant for fluid seals and wear areas.
Alternator Bearing Kit
223688 To repair the turbine alternator.
Cleaning Brush
105749 For cleaning air cap and fluid nozzle.
309457E 61
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 3 Symbols
- 3 Warning Symbol
- 3 Caution Symbol
- 4 Warning
- 6 Warning
- 7 Introduction
- 7 How the Electrostatic Air Spray Gun Works
- 7 Spraying Waterborne Fluids Electrostatically
- 7 Gun Features and Options
- 8 Operating the Spray Function
- 8 Operating the Electrostatics
- 8 Changing the kV Setting
- 10 Installation
- 10 Install the System
- 11 Warning Signs
- 11 Ventilate the Spray Booth
- 13 Install the Air Line Accessories
- 13 Install the Gun and Mounting Bracket
- 14 Connect the Air Line
- 15 Manifold Connections
- 16 Connect the Waterborne Fluid Hose
- 19 Optional Fiber Optic Cable Connection
- 20 Grounding
- 21 Check Electrical Grounding
- 22 Install the Fabric Cover
- 23 Operation
- 23 Fluid Voltage Discharge and Grounding Procedure
- 24 Pressure Relief Procedure
- 24 Operating Checklist
- 25 Select a Fluid Nozzle and Air Cap
- 26 Adjust the Spray Pattern
- 28 Adjust the Electrostatics
- 29 Spraying
- 29 Triggering the Fluid Alone
- 29 Shutdown
- 30 Maintenance
- 30 Daily Care and Cleaning
- 32 Clean the Air Cap and Fluid Nozzle
- 33 Check for Fluid Leakage
- 34 Electrical Tests
- 34 Test Gun Resistance
- 35 Test Power Supply Resistance
- 36 Test Electrode Resistance
- 37 Troubleshooting
- 37 Voltage Loss Troubleshooting
- 40 Spray Pattern Troubleshooting
- 41 Gun Operation Troubleshooting
- 42 Electrical Troubleshooting
- 43 Repair
- 43 Prepare the Gun for Service
- 44 Remove the Gun from the Manifold
- 44 Install the Gun on the Manifold
- 45 Air Cap/Nozzle Replacement
- 46 Electrode Replacement
- 47 Fluid Packing Removal
- 48 Packing Rod Repair
- 49 Piston Repair
- 50 Adjust the Actuator Arm
- 51 Barrel Removal
- 52 Barrel Installation
- 53 Power Supply Removal and Replacement
- 54 Turbine Alternator Removal and Replacement
- 55 Parts
- 59 Accessories
- 59 Air Line Accessories
- 59 Fluid Line Accessories
- 60 Miscellaneous Accessories
- 61 Gun Accessories
- 62 Technical Data
- 64 Graco Standard Warranty
- 64 Graco Information