Saf Information
§
General electrical safety
General points This manual is meant to be used by people who are qualified in the technology needed to work with and maintain the products described therein. It contains the required information which is adequate to conform with the proper use of the products. However, those who wish to make more "advanced" use of our products may find it necessary to consult our nearest distributor in order to obtain additional information.
The manual's contents are not binding and in no way restrict or infringe on the clauses of the guarantee.
User qualifications
Only qualified persons are authorized to use, work with or maintain these products.
The interference of non-qualified persons or failure to observe the security setpoints contained in this manual, or attached to the devices, can endanger the safety of such persons, or irretrievably damage the equipment. The following persons can be designated as " qualified persons ": l l at application design level, design office personnel who are familiar with automation security concepts (e.g., a design engineer, etc.), as far as the use of the devices is concerned, people who are familiar with the l installation, connection and starting of automatic devices (for example, a fitter or cable installer during the installation phase, an operating technician, etc.) as far as operating is concerned, persons familiar with using and managing l automatic devices (for example an operator, etc.) as far as preventive or corrective maintenance is concerned, persons trained and qualified in regulating or repairing automatic devices (for example an operating technician, an after-sales service technician, etc.).
13
TSX DM 57 xxF
Safety Information
Electrical and thermal properties
Details of the electrical and thermal characteristics of the devices can be found in the associated technical manuals (operating manuals, service instructions).
14
TSX DM 57 xxF
