advertisement
Disposal / recycling of materials
If the wheelchair has been supplied to you free of charge it may not belong to you. If it is no longer required follow any instructions given by the organisation issuing the wheel chair in order that it may be returned to them.
The following information describes the materials used in the wheelchair in relation to the disposal or re-cycling of the wheelchair and its packaging.
Specific waste disposal or recycling regulations may be in force locally and these should be taken into consideration when disposal arrangements are made. (This may include the cleaning or de-contamination of the wheelchair before disposal).
Aluminium: Castor forks, wheels, side frames, armrests, frame, leg rests, push handles
Steel: Fasteners, QR axle
Plastic: Handgrips, tube plugs, castor wheels, footplates, armpads and 12” wheel/tyre
Packaging: Low density polythene bag, cardboard box
Upholstery: Woven polyester with PVC coatings and expanded combustion modified foam.
Disposal or recycling should be done through a licensed agent or authorised place of disposal. Alternatively your wheelchair may be returned to your dealer for disposal.
Technical Data
Overall width:
• With standard wheels including handrims, close mount:
RelaX: SW +19cm
• With drum brake wheels including handrims: 21 cm
Weight in kg:
Maximum load: 130 kg
Weight in kg: from 34 kg
Transportation without footrest, wheels, sideguards (antitip, backshell, cushion)18 kg
Footrest (unit): 1,9 kg
Height adjustable armrest (unit): 1,2 kg
24" rear wheels (solid) (pair): 3,6 kg
24" rear wheels (solid) drum brake (pair): 4,0 kg
Back shell + cushion: 4,0 kg
Seat cushion: 1,6 kg
15
Technical Data
According EN 12183: 2009 all there listed parts (seat - back upholstery, arm pad side panel...) are fire restistant according EN 1021
Part 1/2
Maximum occupant mass (test dummy mass): 130 kg
Standard reference
Overall length with legrest (1)
Overall width min.
Folded length
Folded width
990 mm
(16”)
630 mm
990 mm n.a.
Folded height
Total mass
Mass of the heaviest part
Static stability downhill
Static stability uphill
Static stability sideways
Energy consumption
Dynamic stability uphill
Obstacle climbing
Maximum speed forward
Minimum braking distance from max. speed
870 mm
34,0 kg
-
10°
10°
10°
(1) 0° tilt, ELR lowest position, back upright
N/A
N/A
N/A
N/A
N/A max.
1110 mm
(24”)
740 mm
1110 mm n.a.
950 mm
38,2 kg
4,0 kg back
10°
10°
10°
N/A
N/A
N/A
Standard reference
Seat plane angle
Effective seat depth
Effective seat width
Seat surface height at front edge, 0° tilt
Backrest angle
Backrest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest structure
Hand rim diameter
Horizontal location of axle
Minimum tunring radius min.
0°
420 mm
370 mm
480 mm
0°
550 mm
390 mm
90°
210 mm
320 mm
485 mm
- 50 mm
(24”)
860 mm
(16”)
N/A
N/A max.
25°
500 mm
520 mm
580 mm
35°
600 mm
560 mm
180°
330 mm
430 mm
535 mm
- 50 mm
(16”)
900 mm
(24”)
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue strengths (ISO 7176-8) b) Power and control system for electric wheelchairs requirements and test methods (ISO 7176-14) c) Climatic test in accordance with ISO 7176-9 d) Requirements for resistance to ignition in accordance with ISO 7176-16 (EN 1021-1/2)
16
Yes •
N/A •
N/A •
Yes •
Technical Data
Seat height MatriX RelaX²
Seat height
45,0 cm
47,5 cm
50,0 cm
41,5 cm
45,0 cm
47,5 cm
"Castor
bracket"
(Fig. A, B)
1
2
2
1
2
2
45,0 cm 1
Fig. a
"Spacer
Position"
(Fig. C, D)
B
A
B
3°
Rear wheel
24"
24"
24"
B
A
B
22"
22"
22"
B 16"
Fig. c
Castor
8"
8"
8"
6"
6"
6"
8"
Fig. e
"Rear wheel
Position"
(Fig. E)
1
2
3
1
2
3
4
Fig. b Fig. d
Possible seat-height adjustments
The seat height matrix gives the possible seat height adjustments including castor and rear wheel options and fitting positions.
CAUTION:
Measured without seat cushions.
17
advertisement