5
Using the Camera with a
Computer
Connect the camera to a computer using a USB cable.
Make sure to have a commercially available USB cable equipped with a micro B terminal.
Setting the Connection Mode
D
3
Set the connection mode in [USB Connection] of the D 3 menu according to the operation to be performed with a computer.
MSC
(default setting)
PTP
Allows you to copy the data on the memory card to a computer by making the computer recognize the camera as a removable disk.
(p.92)
Allows you to perform tethered shooting by operating the camera with a computer.
(p.93)
t
Memo
• Refer to “Operating Environment for USB Connection and
Provided Software” (p.132) for system requirements to
connect the camera to a computer with a commercially available USB cable and to use the software.
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended. (p.40)
Copying an Image on the Memory Card
1
Set [USB Connection] to [MSC] in the
D
3 menu.
2
Turn the camera off.
3
Open the terminal cover of the camera, and connect the USB cable to the USB/ video output terminal.
4
Connect the USB cable to the USB port of the computer.
5
Turn the camera on.
The camera is recognized as a removable disk.
6
Save the captured images to the computer.
7
Disconnect the camera from the computer.
u
Caution
• The camera cannot be operated while it is connected to a computer. To operate the camera, terminate the USB connection on the computer first, then turn off the camera and remove the USB cable.
• If the “KP” dialog appears on the computer screen in Step 5, select [Open folder to view files] and click the OK button.
92
Operating the Camera with a Computer
You can perform tethered shooting with the camera connected to a computer using the optional “IMAGE Transmitter 2” software. Captured images can be directly saved to the computer.
1
Set [USB Connection] to [PTP] in the
D
3 menu.
2
Turn the camera off.
3
Connect the camera to a computer using a USB cable.
y
Connecting the camera to a computer (p.92)
4
Turn the camera on.
5
Start “IMAGE Transmitter 2” on the computer.
“IMAGE Transmitter 2” is started and the computer recognizes the camera.
t
Memo
• For details on “IMAGE Transmitter 2”, refer to the “User Guide
[Operation]” available at the following site.
http://www.ricoh-imaging.co.jp/english/support/ download_manual.html
• During tethered shooting, the shutter release always has priority regardless of the [AF.S Setting] setting of [AF with
Live View] in the
A
1 menu. (p.61)
Using the Camera with a
Communication Device
This camera has a built-in Wi-Fi™ function. By directly connecting to a communication device such as a smartphone and tablet via wireless
LAN, the camera can be operated from the communication device and images can be shared with others via social networks or e-mail.
Enabling the Wi-Fi™ Function
The Wi-Fi™ function is disabled when the camera is turned on.
Enable the function using one of the following methods.
• Setting from the menus (p.94)
• Using the X
button (p.94)
When the Wi-Fi™ function is enabled, a beep sounds and the
7
(white) icon indicating the wireless
LAN status is displayed on the status screen and Live View screen. When
8 (gray) is displayed, a connection with the communication device is not established correctly.
t
Memo
• Even after the Wi-Fi™ function is enabled, it returns to an inactive state when the camera is turned off and on again.
• Auto Power Off is not available while a Wi-Fi™ connection is established or images are being transferred. If Auto Power
Off is activated while a connection is not established, the
Wi-Fi™ function is disabled. The function is enabled when the camera recovers from Auto Power Off.
• The Wi-Fi™ function is disabled during the USB connection or while outputting image data.
u
Caution
• Do not attempt to use the Wi-Fi™ function in a location where the use of wireless LAN devices is restricted or prohibited, such as on airplanes.
• When using the Wi-Fi™ function, observe local laws and regulations governing radio communication.
• If a memory card with a built-in wireless LAN function (such as an Eye-Fi card or a Flucard) is used, radio wave interference may occur. When this occurs, disable the
Wi-Fi™ function of the camera.
5
93
Setting from the Menus
1
Select [Wi-Fi] in the
D
3 menu and press
D
.
The [Wi-Fi] screen appears.
2
Set [Action Mode] to [On].
Select [Off] to disable the Wi-Fi™ function.
Action Mode
Communication Info
Reset Settings
D
3
5
3
Press
F
twice.
t
Memo
• In Step 2, select [Communication Info] to check the SSID,
Password, and MAC Address of the wireless LAN. Or, select
[Reset Settings] to reset the settings to their default values.
Using the
X
Button
If you use the Wi-Fi™ function frequently, assign the function to the X button so that you can easily turn the function on and off with a simple button operation.
1
Assign [Wi-Fi] to
X
.
y
Setting the
X
button operation (p.102)
2
Press and hold
X
in standby mode.
A beep sounds and [Wi-Fi enabled] appears on the monitor.
Press and hold
X
again to disable the Wi-Fi™ function.
Operating the Camera with a
Communication Device
The following functions can be used by connecting the camera to a communication device via Wi-Fi™ and using the dedicated application “Image Sync”.
Remote Capture
Image View
Displays the Live View image of the camera on the communication device, and enables controlling exposure settings and shooting by operating the communication device.
Displays the images saved on the memory card inserted in the camera on the communication device, and imports the images to the communication device.
Image Sync supports iOS and Android™, and can be downloaded from the App Store or Google Play™. For the supported operating system and other details, refer to the download site.
t
Memo
• The Image Sync screenshots used in this manual are the ones under development and may differ from the actual display. The screen layout and elements may be also changed due to causes such as the version upgrade of the application or operating system.
• For details on how to operate the communication device, refer to the operating manual of the device.
94
Connecting the Camera and a Communication Device
Connect the camera and a communication device via Wi-Fi™, and start Image Sync installed on the communication device.
When an Android Device is Used
1
Set the wireless LAN (Wi-Fi™) function to ON on the communication device.
2
Start Image Sync on the communication device.
The camera selection screen appears on the communication device.
3
Tap [PENTAX KP].
The [Choose a Network] screen appears on the communication device.
5
Enter the password, and tap [Connect].
A Wi-Fi™ connection is established between the camera and the communication device.
The list of images appears on the
Image Sync screen.
t
Memo
• Refer to [Communication Info] in [Wi-Fi] of the D 3 menu for
the default password. (p.94)
5
4
Tap [PENTAX_xxxxxx] in the [Network List].
The [Enter Password] screen appears.
95
5
When an iOS Device is Used
1
Set the wireless LAN (Wi-Fi™) function to ON on the communication device.
2
Tap [PENTAX_xxxxxx] in the list of detected
Wi-Fi™ networks.
3
Enter the password, and tap [Join].
A Wi-Fi™ connection is established between the camera and the communication device.
Screens of Image Sync
Flick left or right on the screen to switch operation modes.
Application image list Camera image list
A
mode
4
Start Image Sync on the communication device.
Image Sync is started, and the list of images appears.
t
Memo
• You can change the operation mode also by tapping the buttons displayed at the bottom of the screen.
96
Shooting with a Communication Device
The Live View image of the camera and buttons for shooting are displayed on the shooting screen of Image Sync.
1
2
3
4
9
10
5
6
7
11
12
13
14
1
Settings (p.100)
2
Capture mode
3
Live View
4
AF frame
5
White Balance, Shutter Speed, Aperture value, EV
Compensation, Sensitivity
6
Live View on/off
7
Operation modes
8
Communication icon
9
Battery level
10
Thumbnail of the last captured image
(When tapped, the camera image list is displayed.)
11
File Format, Image storage capacity
12
Drive Mode
13
Green button
14
Shutter release button
1
Set up the basic settings on the camera.
2
Check the Live View image on the shooting screen of
Image Sync.
3
Change the settings using
Image Sync as necessary.
5
97
Tap an item and select a value from the list.
Viewing Images
You can view the images saved either in the camera or in the communication device.
1
2
4
5
5
98
4
When the focus method is set to
v
, tap the position where you want to perform autofocus in the Live View image.
Autofocus is performed at the tapped position.
5
Tap the shutter release button.
The captured image is displayed as a thumbnail.
u
Caution
• The capture mode ( A (still picture) mode or C (movie) mode) can be changed by using the capture mode selector switch on the camera.
• Shooting with Image Sync is not available when the drive mode is set to [Continuous Shooting (H)], [Interval Shooting],
[Interval Composite], [Interval Movie Record], or [Star
Stream].
• The captured images are saved to the memory card inserted in the camera. Shooting cannot be performed if there is not enough available space on the memory card.
t
Memo
• Shooting can also be performed by tapping the Live View
image. Set in [Touch AF] on the [Settings] screen. (p.100)
• While shooting with Image Sync, the autofocus system operates in x mode regardless of the autofocus mode setting, and the shutter release has priority regardless of the
[AF.S Setting] setting of [AF with Live View] in the A 1 menu.
(p.61)
3
1
Multiple image selection button
2
Album selector button (available for the application image list only)
3
Operation modes
4
Settings (p.100)
5
Communication icon
Tap the thumbnail image to view it in single image display and check its shooting information.
Touch operations
Flick left/right
Pinch out/in
Shows the previous/next image.
Magnifies/reduces the image.
Selecting the Image Storage Location
When viewing images in application image list display, you can select the image storage location (album) from “Application” or
“Gallery” (or “Camera Roll”).
1
Tap
4
.
Selecting Multiple Images
1
Tap
5
.
2
Tap the images to select.
Blue check marks appear.
2
Select the album.
The images in the selected album are displayed.
3
Touch and hold one of the selected images.
5
99
4
Select the desired action.
Changing the Settings
1
Tap
6
.
5
t
Memo
• When you touch and hold the desired image on the image list display screen or the shooting information display screen, the same screen as Step 4 appears and the desired action can be selected.
The [Settings] screen appears.
The following settings are available.
Touch AF
Image Capture
Settings
Composition
Adjustment
General
Settings
Sets whether to perform only autofocus or perform shooting after autofocus when touching the Live View image.
Changes the settings for File Format and JPEG Recorded Pixels.
Turns the composition adjustment function on or off.
Changes the communication settings and the display language.
100
2
Tap [General Settings] to change the communication settings and the display language.
3
Tap the setting item to change.
Device Information
Language
Communication Settings
The password and wireless channel can be changed.
4
Change the settings and tap
1
.
5
101
