Appendix. Pentax KP, K-p

PDF

Dokument

Restrictions on the Combinations of Special Functions

Electronic

Shutter

Clarity/

Skin Tone/

Digital

Filter

Flash

Continuous

Shooting

Bracketing/

Depth of Field

Bracketing/

Motion Bracketing

Mirror Lock-up

Shooting

Multi-exposure

Interval Shooting

Interval Composite

Interval Movie

Record

Star Stream

HDR Capture

Pixel Shift Resolution

AA Filter Simulator

*1 There is a restriction on the minimum value for [Interval].

*2 Only when the timed exposure is set.

*3 [Bracketing] is not available.

*4 Only the final frame can be saved.

HDR

Capture

Pixel Shift

Resolution

ASTRO-

TRACER

AA Filter

Simulator

#: Restricted

: Not available

Distortion

Correction/

Diffraction

Correction

Save RAW

Data

115

116

Functions Available with Various

Lenses

All capture modes are available when a DA, DA L, D FA, FA J, or FA lens is used, or when a lens with an 9 position is used with the aperture ring set to the

position.

Depending on the lens to use, the following restrictions apply.

x : Available #: Restricted

: Not available

Lens

[Mount type]

DA L

D FA

FA J

Function

[KAF]

[KAF2]

[KAF3]

[KAF4]

[KAF]

[KAF2]

[KAF] [KA] [K]

Autofocus

(Lens only)

(With AF adapter 1.7×)

Manual focus

(With focus indicator)

(With matte field) x

– x x

– x

–

# x

–

# x

Quick-shift focus

AF Active Area [Auto]

AE Metering [Multi-segment] x

G / H / I / J / K mode x x

× × × × x x #

× x x x x x x

L mode x x x x #

P-TTL auto flash

Automatic obtaining of the lens focal length information x x x x x x x

Lens Correction #

× × ×

*1 Lenses with a maximum aperture of F2.8 or faster. Only available at the

position.

*2 Lenses with a maximum aperture of F5.6 or faster.

*3 Available when using the built-in flash, AF540FGZ, AF540FGZ II,

AF360FGZ, AF360FGZ II, AF201FG, AF200FG, or AF160FC.

*4 Only available with compatible lenses.

*5 Distortion Correction and Peripheral Illumination Correction are disabled when a DA FISH-EYE 10-17mm lens is used.

*6 To use an FA SOFT 28mm F2.8 lens, FA SOFT 85mm F2.8 lens, or

F SOFT 85mm F2.8 lens, set [24 Using Aperture Ring] to [Enable] in the

4 menu. Pictures can be taken with the aperture you set, but only within a manually adjustable aperture range.

*7 The Lens Correction features are available with the following FA lenses (Only Distortion Correction and Lateral Chromatic Aberration

Adjustment can be used when the aperture ring is set to a position other than

.): FA k

24mm F2 AL [IF], FA 28mm F2.8 AL, FA 31mm

F1.8 Limited, FA 35mm F2 AL, FA 43mm F1.9 Limited, FA 50mm

F1.4, FA 77mm F1.8 Limited, FA k

85mm F1.4 [IF], FA k

200mm F2.8

ED [IF], FA k

MACRO 200mm F4 ED, FA k

300mm F2.8 ED [IF],

FA k

300mm F4.5 ED [IF], FA k

ED [IF], FA k

400mm F5.6 ED [IF], FA k

600mm F4

28-70mm F2.8 ED [IF], FA k

80-200mm F2.8 ED [IF], and FA k

250-600mm F5.6 ED [IF].

*8 Fixed to [Spot].

*9 J with the aperture set to wide open. (The aperture ring has no effect on the actual aperture value.) u

Caution

• When the aperture ring is set to a position other than

or a lens without an 9 position or accessories such as an extension tube are used, the camera does not operate unless

[24 Using Aperture Ring] is set to [Enable] in the E 4 menu.

Refer to “Using the Aperture Ring” (p.118) for details.

• When a retractable lens is attached and is not extended, you cannot take pictures or use some functions. If the lens is retracted during shooting, the camera stops working.

About Mount Names

DA and D FA lenses with a motor and FA zoom lenses with a power zoom use the KAF2 mount. (Of these lenses, the lenses without an AF coupler use the KAF3 mount.)

The KAF3 mount equipped with an electromagnetic diaphragm mechanism instead of an aperture control lever is referred to as the KAF4 mount.

FA single focal length lenses (non-zoom lenses), DA and DA

L lenses without a motor, and D FA, FA J, and F lenses use the KAF mount. (The power zoom function is not compatible with this camera.)

Refer to respective lens manuals for details.

Compatibility with the Built-in Flash

Depending on the lens being used, the use of the built-in flash may be limited.

(As of December 2016)

Lens

Restrictions when using the built-in flash

DA FISH-EYE 10-17mm

F3.5-4.5 ED [IF]/

DA 12-24mm F4 ED AL/

DA 14mm F2.8 ED [IF]/

DA 15mm F4 ED AL/

D FA 15-30mm F2.8 ED SDM WR/

300mm F2.8 ED [IF]/

DA 560mm F5.6 ED AW/

600mm F4 ED [IF]/

250-600mm F5.6 ED [IF]

F FISH-EYE 17-28mm

F3.5-4.5

DA 16-45mm F4 ED AL

The built-in flash is not available due to vignetting.

Vignetting may occur if the focal length is less than 20 mm.

When the focal length is less than 28 mm, or when the focal length is 28 mm and the shooting distance is 1 m or less, vignetting may occur.

DA 17-70mm F4 AL [IF]

SDM

16-50mm F2.8 ED AL

[IF] SDM

DA 16-85mm F3.5-5.6 ED

DC WR

When the focal length is 20 mm or less, or when the focal length is 35 mm and the shooting distance is less than 1.5 m, vignetting may occur.

When the focal length is 24 mm or less and the shooting distance is 0.8 m or less, vignetting may occur.

When the focal length is less than 24 mm, or when the focal length is 35 mm and the shooting distance is 1 m or less, vignetting may occur.

Lens

DA 18-250mm F3.5-6.3 ED

AL [IF]

DA 18-270mm F3.5-6.3 ED

SDM

D FA 24-70mm F2.8 ED

SDM WR

28-70mm F2.8 AL

FA SOFT 28mm F2.8/

FA SOFT 85mm F2.8

Restrictions when using the built-in flash

Vignetting may occur if the focal length is less than 35 mm.

Vignetting may occur if the focal length is less than 24 mm.

Vignetting may occur if the focal length is less than 36 mm.

Vignetting may occur if the focal length is 28 mm and the shooting distance is less than

1 m.

The built-in flash always discharges fully.

117

Using the Aperture Ring

4

The shutter can be released even if the aperture ring of the D

FA, FA, F, or A lens is not set to the 9 position or a lens without an 9 position is attached.

Select [Enable] in [24 Using Aperture

Ring] of the E 4 menu.

Shutter will release when aperture ring is not set to the

23 1

The following restrictions apply depending on the lens being used.

Lens

D FA, FA, F, A, M (lens only or with automatic diaphragm accessories such as Auto Extension

Tube K)

D FA, FA, F, A, M, S (with diaphragm accessories

Restriction

The aperture remains open.

The shutter speed changes in relation to the open aperture but an exposure deviation may occur.

118

Manual diaphragm lens such as reflex lens (lens only)

FA SOFT 28mm/

FA SOFT 85mm/

F SOFT 85mm

(lens only) deviation may occur.

Pictures can be taken with the set aperture value within a manually adjustable aperture range.

*1 When the mode dial is set to L or M , the aperture can be stopped down to the selected value.

Memo

• If the aperture ring is set to a position other than

, the camera operates in J mode regardless of the mode dial setting except when set to

mode.

• [F--] appears for the aperture indicator in the status screen,

Live View screen, and viewfinder.

How to Achieve the Correct Exposure with the Aperture

Ring Not Set to

The correct exposure can be achieved by the following procedures when the aperture ring is not set to 9 .

1 Set the mode dial to L .

2 Set the aperture ring to the desired aperture.

3 Press M .

The correct shutter speed will be set.

4 If the correct exposure cannot be achieved, adjust the

ISO sensitivity.

Performing Catch-in Focus Shooting

4

You can perform Catch-in Focus shooting using a manual focus lens. The shutter is released automatically when the subject comes into focus.

Attach a manual focus lens to this camera.

Set [22 Catch-in Focus] to [On] in the

4 menu.

Set the

switch to

and set [AF Mode] to

Place the camera on a fixed support such as a tripod.

Adjust the focus to the position where the subject may pass and press

fully.

When the subject comes into focus at the specified position, the shutter is released automatically.

Setting the Focal Length

4

The Shake Reduction function operates by obtaining the lens information such as focal length. Set the focal length when using a lens that the focal length information cannot be automatically obtained.

Set [24 Using Aperture Ring] to [Enable] in the

4 menu.

Turn the camera off.

Attach a lens to the camera and turn the camera on.

The [Input Focal Length] screen appears.

Use

to set the focal length.

Press

to select a value from the list.

When using a zoom lens, select the actual focal length which the zoom is set to.

35 mm

Press

The camera returns to standby mode.

Memo

• The focal length setting can be changed in [Input Focal

Length] of the A 4 menu.

119

120

Functions when Using an

External Flash

Use of the following external flashes (optional) enables a variety of flash modes, such as P-TTL auto flash mode.

x : Available #: Restricted

: Not available

Compatible Flash

Camera Function

Built-in

Flash

AF540FGZ

AF540FGZ II

AF360FGZ

AF360FGZ II

AF201FG

AF200FG

AF160FC

Red-eye reduction flash x x x

Auto Flash Discharge

Automatic switch to flash sync speed

Automatic setting of the aperture value in G or I mode

P-TTL auto flash x x x

x x x

Slow-speed Sync flash

Flash Exposure

Compensation

AF assist light of the external flash

Trailing Curtain Sync flash

x x

× x x x

x x x

Contrast Control Sync flash

Slave flash

High-speed Sync flash

Wireless flash

x x x

*1 Only the R mode is available for the capture mode.

*2 Available only when using a DA, DA L, D FA, FA J, FA, F, or A lens.

(When using a lens with an aperture ring, set the aperture ring to the

9 position.)

*3 AF assist light is not available with the AF540FGZ or AF360FGZ.

*4 Shutter speed of 1/90 seconds or slower.

*5 Available with the AF201FG.

*6 Available only when combined with the AF540FGZ, AF540FGZ II,

AF360FGZ, or AF360FGZ II (two or more compatible external flashes for Contrast Control Sync flash required).

*7 Available only when combined with the AF540FGZ, AF540FGZ II,

AF360FGZ, or AF360FGZ II.

Caution

• Never press

on the camera when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at once, connect them using an extension cord.

• Flashes with the reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera and flash.

• Do not combine with accessories that have a different number of contacts, such as Hot Shoe Grip, as a malfunction may occur.

• Combining with flashes from other manufacturers may cause equipment breakdown.

Memo

• With the AF540FGZ, AF540FGZ II, AF360FGZ, or

AF360FGZ II, you can use the high-speed sync flash to discharge a flash and take a picture at a shutter speed faster than 1/180 seconds. Set the capture mode to

, or

• By using two or more external flashes (AF540FGZ,

AF540FGZ II, AF360FGZ, or AF360FGZ II) or by using these external flashes in combination with the built-in flash, you can use the wireless mode (controller flash) to shoot in P-TTL flash mode without connecting the flash units with a cord. In this case, set the camera channel on the external flashes.

You can check the set channel in the status screen, Live View

screen, and viewfinder. (p.14, p.19)

Using the GPS Unit

When the optional GPS unit O-GPS1 is attached to the camera,

GPS information is saved in the shooting information of an image, and furthermore, the following functions are available.

Electronic

Compass

ASTRO-

TRACER

GPS Time

Sync

Displays the current latitude, longitude, altitude, direction,

Coordinated

Universal Time

(UTC), capture mode, and exposure value.

N 36°45.410'

W140°02.000'

89m

0°

Select [Electronic Compass] in “Shooting Info

Display” (p.16).

Tracks and captures celestial bodies.

By matching the movement of the camera’s built-in Shake Reduction unit with the movement of celestial bodies, celestial bodies can be captured as individual points even when

shooting with a long exposure setting. (p.121)

Automatically adjusts the camera’s date and time settings using information obtained from

GPS satellites.

Set in [GPS/E-Compass] of the

3 menu.

Memo

• Refer to the manual of the GPS unit for details on how to attach the unit and information on the unit’s functions.

Caution

• “Simple Navigation” cannot be used with this camera.

Shooting Celestial Bodies

Setting the ASTROTRACER

3

Attach the GPS unit to the camera and turn the camera on.

Select [ASTROTRACER] in the

3 menu and press

The [ASTROTRACER] screen appears.

Select [ASTROTRACER] and press

Select [On] and press

ASTROTRACER

Precise Calibration

Enables ASTROTRACER function in Bulb mode to eliminate star

Select [Precise Calibration] and press

The [Precise Calibration] screen appears.

Rotate the camera according to the instruction displayed on the monitor.

The result of calibration appears.

Rotate camera in each of three directions ensuring that each rotation exceeds 180 degrees

Press

The screen of Step 4 reappears.

If [The operation could not be completed correctly] appears, change the camera direction and perform a calibration again.

Press

twice.

The camera returns to standby mode.

121

122

Caution

• When performing a calibration, be careful not to drop the camera. Wrap the strap around your wrist or take other preventive measures.

• If the battery is removed, perform a calibration again after the battery is put back in.

• As the magnetic field environment varies depending on the shooting location, a precise calibration must be performed at each location when shooting images of celestial bodies with

ASTROTRACER.

• Changing the lens or the angle of the monitor after performing a calibration may have some effect on the magnetic field environment. In this case, perform a calibration again.

Shooting with the ASTROTRACER

Set the mode dial to

and set the focus method to

Set the shooting conditions.

Available operations

M Enables/Disables the timed exposure.

Changes the exposure time within the range from 10" to 5'00" when the timed exposure is enabled.

Changes the aperture value.

Z Performs a precise calibration.

Adjust the focus and press

fully.

Shooting starts.

Press

fully again.

Shooting stops.

When the timed exposure is enabled, shooting stops automatically after the set time has elapsed.

Caution

• This function cannot be used in some capture modes or in

combination with some other functions. (p.115)

When the Monitor is too Bright

For shooing in a dark place for a long period of time, you can change the monitor display color to red by setting [Night

Vision LCD Display] to [On] in the D 2 menu. When [Night

Vision LCD Display] is assigned to X , you can turn the

Night Vision LCD Display feature on or off by a simple button

operation. (p.102)

Troubleshooting

Memo

• In rare cases, the camera may not operate correctly due to causes such as static electricity, etc. This can be remedied by taking the battery out and putting it back in again. If the camera operates correctly, it does not require any repairs.

Problem

The camera does not turn on.

The shutter cannot be released.

Cause

The battery is not installed properly.

The battery power is low.

The built-in flash is being charged.

There is no available space on the memory card.

Data is being processed.

The lens aperture ring is set to a position other than

9 .

The autofocus mode is set to x and the subject is not in focus.

Remedy

Check the orientation of the battery.

Charge the battery.

Wait until charging is finished.

Insert a memory card with available space or delete unwanted images.

Wait until processing is finished.

Set the lens aperture ring to the

9 position or select [Enable] in

[24 Using Aperture Ring] of the

4 menu. (p.118)

Set the focus method to w and adjust focus manually.

Problem

Autofocus does not work.

The focus cannot be locked.

The built-in flash does not discharge.

The subject is difficult to focus on.

Cause

The subject is too close.

[AF Active Area] of

Live View is set to

[Tracking].

Remedy v cannot work well for lowcontrast objects (the sky, white walls, etc.), dark colors, intricate designs, rapidlymoving objects, or scenery shot through a window or a net-like pattern.

Lock the focus on another object located at the same distance as your subject, then aim at the target and take a picture. Alternatively, use w .

Move away from the subject and take a picture.

Set [AF Active Area] to other

than [Tracking]. (p.62)

The flash mode is set to [Auto Flash

Discharge].

When the flash mode is set to

[Auto Flash Discharge], the flash does not discharge if the subject is bright.

Change the flash mode. (p.57)

The camera is not recognized when it is connected to a computer.

The USB connection mode is set to [PTP].

Set [USB Connection] to [MSC] in the D

3 menu. (p.92)

Dust or dirt particles appear in images.

Pixel defects such as bright spots and dark spots appear in the image.

The CMOS sensor is dirty or dusty.

There are defective pixels in the CMOS sensor.

Activate [Dust Removal] from the D 5 menu. The Dust

Removal function can be activated every time the camera is turned on and off.

Refer to “Sensor Cleaning”

(p.124) if the problem persists.

Activate [Pixel Mapping] from the D 5 menu.

It takes about 30 seconds to correct the defective pixels, so be sure to install a fully charged battery.

123

Sensor Cleaning

5

Raise the mirror up and open the shutter when cleaning the

CMOS sensor with a blower.

Turn the camera off and remove the lens.

Turn the camera on.

Select [Sensor Cleaning] in the

5 menu and press

The [Sensor Cleaning] screen appears.

Select [Mirror Up] and press

The mirror rises up.

Clean the CMOS sensor with a blower.

Turn the camera off.

The mirror automatically returns to its original position.

Caution

• Never use a spray blower or a blower with a brush. The

CMOS sensor may be damaged. Do not wipe the CMOS sensor with a cloth.

• Do not put the tip of the blower inside the lens mount area. If the power is turned off during cleaning, it may cause damage to the shutter, the CMOS sensor, and the mirror. Hold the camera with the lens mount down while cleaning the sensor so dust will fall away from the camera when the blower is used.

• When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor. Install a fully charged battery. If the battery capacity becomes low during cleaning, a warning beep will sound. In this case, stop cleaning immediately.

Memo

• Please contact your nearest service center for professional cleaning as the CMOS sensor is a precision part.

• You can use the optional Image Sensor Cleaning Kit O-ICK1 when cleaning the CMOS sensor.

124

Error Messages

Memory card full

No image

This image cannot be displayed

No card in the camera

Memory card error

Card is not formatted

Card is locked

Cannot use this card

This image cannot be magnified

This image is protected

Description

The memory card is full and no more images can be saved. Insert a new memory card or delete unwanted files.

There are no images that can be played back on the memory card.

You are trying to play back an image in a format not supported by this camera. You may be able to play it back on a computer.

There is no memory card inserted in the camera.

The memory card has a problem, and image capture and playback are impossible. You may be able to play back or recover the images on a computer.

The memory card you have inserted is unformatted or has been previously used on another device and is not compatible with this camera. Use the card after formatting it with this camera.

The write-protect switch on the memory

card you have inserted is locked. (p.137)

A memory card not compatible with this camera is inserted.

You are trying to magnify an image that cannot be magnified.

You are trying to delete an image that is protected. Remove the protection from

the image. (p.110)

Not enough battery power remaining to activate Pixel Mapping

Not enough battery power remaining to clean sensor

Not enough battery power remaining to update the firmware

Unable to update firmware.

There is a problem with the firmware update file

These messages appear when you try to perform Pixel Mapping or Sensor

Cleaning, or to update the firmware if the battery level is insufficient. Install a fully charged battery.

The firmware cannot be updated. The update file is damaged. Try downloading the update file again.

Error Messages

Image folder cannot be created

Unable to store image

The operation could not be completed correctly

No more images can be selected

No image can be processed

This image cannot be processed

This function is not available in the current mode

The camera will turn off to prevent damage from overheating

Description

The maximum folder number (999) is being used, and no more images can be saved. Insert a new memory card or format the card.

The image could not be saved because of a memory card error.

The operation failed. Try the operation again.

You are trying to select more than the maximum number of images for the following functions.

• Select & Delete

• RAW Development

• Protect

There are no images that can be processed using the Digital Filter or RAW

Development function.

This message appears when you try to perform Resize, Cropping, Digital Filter,

Movie Edit, RAW Development, or Save as Manual WB for images captured with other cameras, or when you try to perform

Resize or Cropping for minimum file size images.

You are trying to set a function that is not available with the currently selected capture mode.

The camera will turn off because its internal temperature is too high. Leave the camera turned off until it has had time to cool down before turning on the camera again.

Shutter release is disabled.

Ensure the zooming index on the lens is set to a position that permits shutter release

Pictures cannot be taken when a retractable lens is attached and is not

extended. (p.46)

125

126

Main Specifications

Model Description

Type

Lens Mount

Usable Lenses

TTL autofocus, auto-exposure SLR digital camera with a built-in retractable P-TTL flash

PENTAX KAF2 bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)

KAF4, KAF3, KAF2 (power zoom not compatible),

KAF, KA mount lenses

Image Capture Unit

Image Sensor

Effective Pixels

Total Pixels

Dust Removal

CMOS with a primary color filter, Size: 23.5 × 15.6 (mm)

Approx. 24.32 megapixels

Approx. 24.96 megapixels

Image sensor cleaning using ultrasonic vibrations

“DR II”

ISO range: 100 to 819200

• EV steps can be set to 1 EV, 1/2 EV, or 1/3 EV

Sensitivity

(Standard Output)

ISO AUTO Setting

ISO Range (Maximum), ISO Range (Minimum)

ISO Sensitivity Options: AUTO, Tv

Minimum Shutter Speed: AUTO (Slow, Standard,

Fast), Tv (1/6000 to 30 seconds)

Image Stabilizer Sensor-shift Shake Reduction (SR II)

AA Filter

Simulator

Moiré reduction using the SR unit: Off, Type1,

Type2, Bracketing (2 images), Bracketing (3 images)

File Formats

Recording

Formats

Recorded Pixels

Quality Level

Color Space

Storage Media

Storage Folder

RAW (PEF/DNG), JPEG (Exif 2.3 compliant), DCF

2.0 compliant

JPEG: q (24M: 6016×4000), p (14M:

4608×3072), o (6M: 3072×2048), r (2M:

1920×1280)

RAW: 24M (6016×4000)

RAW (14bit): PEF, DNG

JPEG: m (Best), l (Better), k (Good)

• RAW + JPEG simultaneously recordable sRGB, AdobeRGB

SD, SDHC*, and SDXC* memory cards

* UHSI compatible

Folder Name: Date (100_1018, 101_1019...) or user-assigned name (default: PENTX)

Storage File

File Name: user-assigned name (default:

IMGP  )

File No.: Sequential Numbering, Reset

Viewfinder

Type Pentaprism Finder

Coverage (FOV) Approx. 100%

Magnification

Eye-Relief Length

Approx. 0.95× (50mm F1.4 at infinity)

Approx. 20.5 mm (from the view window)

Approx. 22.3 mm (from the center of lens)

Diopter

Adjustment

Approx. -2.5 to +1.5 m

-1

Focusing Screen

Interchangeable Natural-Bright-Matte III focusing screen

Live View

Type

Autofocusing

System

Display

TTL method using the CMOS image sensor

AF Method: Contrast detection AF

AF Active Area: Face Detection, Tracking, Multiple

AF Points, Select, Spot

Focus Peaking: Highlight Edge, Extract Edge, Off

Field of view: approx. 100%, Magnified view (up to

16×), Grid Display (4×4 Grid, Golden Section, Scale,

Square 1, Square 2, Grid Color: Black, White),

Histogram Display, Highlight Alert, Composition

Adjustment

LCD Monitor

Type

Size

Dots

Adjustment

Outdoor View

Setting

Night Vision LCD

Display

Tiltable wide viewing angle TFT color LCD monitor featuring an air-gapless structure with a temperedglass front panel

3.0 inches (aspect ratio 3:2)

Approx. 921K dots

Brightness, saturation and colors adjustable

Adjustable ±2 steps

On, Off

White Balance

Type

Preset Modes

TTL method using the CMOS image sensor

Auto White Balance, Multi Auto White Balance,

Daylight, Shade, Cloudy, Fluorescent Light

(

: Daylight Color,

: Daylight White,

: Cool

White,

: Warm White), Tungsten Light, n ,

Manual White Balance (up to 3 settings), Color

Temperature (up to 3 settings), Copying the white balance settings of a captured image

Fine Adjustment Adjustable ±7 steps on A-B axis and G-M axis

Focus System

Type

Focus Sensor

TTL phase-matching autofocus system

SAFOX 11, 27 points (25 cross type focus points in the center)

Brightness Range EV -3 to 18 (ISO100, at normal temperature)

AF Modes

Single AF ( x ), Continuous AF ( y ), Auto select AF ( z )

Focusing Area

Selection Modes

AF Assist Light

Auto (27 AF Points), Zone Select, Select, Expanded

Area AF (S, M, L), Spot

Dedicated LED AF assist light

Exposure Control

Type

TTL open-aperture metering using 86K pixel RGB sensor

Metering modes: Multi-segment, Center-weighted,

Spot

Metering Range EV -3 to 20 (ISO100 at 50mm F1.4)

Capture Modes

Scene Analyze Auto, Program, Sensitivity Priority,

Shutter Priority, Aperture Priority, Shutter & Aperture

Priority, Manual, Bulb, USER1, USER2, USER3,

USER4, USER5

EV Compensation ±5 EV (1/3 EV steps or 1/2 EV steps can be selected)

AE Lock

Can be assigned to f , X , Y , and Z in

[Button Customization].

Shutter

Type

Shutter Speed

Mechanical shutter (electronically controlled verticalrun focal plane shutter), Electronic shutter

[Mechanical shutter] Auto: 1/6000 to 30 seconds,

Manual: 1/6000 to 30 seconds (1/3 EV steps or 1/2

EV steps), Bulb (timed exposure setting possible from 10 seconds to 20 minutes)

[Electronic shutter] Auto: 1/24000 to 30 seconds,

Manual: 1/24000 to 30 seconds (1/3 EV steps or 1/2

EV steps)

Drive Modes

Mode Selection

Continuous

Shooting

Multi-exposure

Single frame, Continuous (H, M, L), Self-timer

(12 sec., 2 sec., continuous), Bracketing

5 frames), Depth of Field Bracketing

(2, 3, or

(3 frames),

Motion Bracketing

(3 frames), Mirror Lock-up

Shooting, Multi-exposure

, Interval Shooting

Interval Composite

, Interval Movie Record

, Star

Stream

*1 Available with Self-timer

*2 Available with Continuous Shooting or Self-timer

• Depth of Field Bracketing is available in J mode.

• Motion Bracketing is available in I mode.

Max. approx. 7.0 fps, JPEG ( q : m at

Continuous H): up to approx. 28 frames, RAW: up to approx. 8 frames, RAW+: up to approx. 7 frames

Max. approx. 3.0 fps, JPEG ( q : m at

Continuous M): up to approx. 70 frames, RAW: up to approx. 15 frames, RAW+: up to approx. 10 frames

Max. approx. 0.8 fps, JPEG ( q : m at

Continuous L): up to approx. 100 frames, RAW: up to approx. 100 frames, RAW+: up to approx. 25 frames

• When the sensitivity is set to ISO100

• The shooting speed slows down when the electronic shutter is used or a higher sensitivity is set.

Composite Mode: Additive, Average, Bright

Number of Shots: 2 to 2000 times

127

Interval Shooting

[Interval Shooting]

Interval: 2 sec. to 24 hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Self-timer, Set Time

[Interval Composite]

Interval: 2 sec. to 24 hr., Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 2 to 2000 times, Start Interval: Now, Self-timer, Set Time,

Composite Mode: Additive, Average, Bright, Save

Process: On, Off

[Interval Movie Record]

Recorded Pixels: z , u , t , Recording Format:

Motion JPEG (AVI), Interval: 2 sec. to 24 hr.,

Standby Interval: minimum time or 1 sec. to 24 hr.,

Number of Shots: 8 to 2000 times (When z is selected: 8 to 500 times), Start Interval: Now, Selftimer, Set Time

[Star Stream]

Recorded Pixels: z , u , t , Recording Format:

Motion JPEG (AVI), Standby Interval: minimum time or 1 sec. to 24 hr., Number of Shots: 8 to 2000 times

(When z is selected: 8 to 500 times), Start Interval:

Now, Self-timer, Set Time, Fade-out: Off, Low,

Medium, High

Flash

Built-in Flash

Flash Modes

Sync Speed

Flash Exposure

Compensation

External Flash

Built-in retractable P-TTL pop-up flash

Guide number: approx. 6.0 (ISO100/m)

Angle of view coverage: equivalent to 28mm lens in

35 mm format

Auto Flash Discharge (Scene Analyze Auto), Auto

Flash + Red-eye Reduction (Scene Analyze Auto),

Flash On, Flash On + Red-eye Reduction, Slowspeed Sync, Slow-speed Sync + Red-eye

Reduction, Trailing Curtain Sync, Manual Flash

Discharge (FULL to 1/128 power), Wireless Flash

Discharge (Controller Flash)

1/180 seconds

-2.0 to +1.0 EV

P-TTL, Leading Curtain Sync, Trailing Curtain Sync,

Contrast Control Sync*, High-speed Sync, Wireless

Sync

* Available with two or more compatible external flash units

Capture Functions

Custom Image

Auto Select, Bright, Natural, Portrait, Landscape,

Vibrant, Radiant, Muted, Flat, Bleach Bypass,

Reversal Film, Monochrome, Cross Processing

Cross Processing Random, Preset 1-3, Favorite 1-3

Digital Filter

Clarity

Skin Tone

HDR Capture

Pixel Shift

Resolution

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

-4.0 to +4.0

Type1, Type2, Off

Auto, Type1, Type2, Type3, Advanced HDR, Off

Bracket Value: adjustable

Auto Align (automatic composition correction function): available

On, Off

Motion Correction: On, Off

Lens Correction

Distortion Correction, Peripheral Illumination

Correction, Lateral Chromatic Aberration

Adjustment, Diffraction Correction

D-Range Settings Highlight Correction, Shadow Correction

Noise Reduction Slow Shutter Speed NR, High-ISO NR

Horizon

Correction

Composition

Adjustment

Electronic Level

Program Line

SR On: corrects up to 1.0 degree

SR Off: corrects up to 1.5 degrees

Adjustment range of ±1 mm up, down, left or right

(±0.5 mm when rotated); rotating range of ±1 degree

Displayed in viewfinder (horizontal direction only); displayed on monitor (horizontal direction and vertical direction)

Auto, Standard, Hi-speed Priority, DOF Priority

(Deep), DOF Priority (Shallow), MTF Priority

Movie

Recording Format MPEG-4 AVC/H.264 (MOV)

Recorded Pixels/

Frame Rate u t

(1920×1080, 60i/50i/30p/25p/24p)

(1280×720, 60p/50p)

Autofocusing

System

AF Method: Contrast detection AF

AF Mode: Single AF ( x ), Continuous AF

( y )*

* Continuous AF ( y ) is available only when a compatible lens is attached to the camera.

AF Active Area: Multiple AF Points, Select, Spot

Focus Peaking: Highlight Edge, Extract Edge, Off

128

Sound

Recording Time

Digital Filter

Built-in stereo microphone, external microphone

(stereo recording compatible)

Recording Sound Level: adjustable

Up to 4 GB or approx. 25 minutes; automatically stops recording if the internal temperature of the camera becomes high.

Custom Image

Auto Select, Bright, Natural, Portrait, Landscape,

Vibrant, Radiant, Muted, Flat, Bleach Bypass,

Reversal Film, Monochrome, Cross Processing

Cross Processing Random, Preset 1-3, Favorite 1-3

Extract Color, Replace Color, Toy Camera, Retro,

High Contrast, Shading, Invert Color, Unicolor Bold,

Bold Monochrome

Playback Functions

Playback View

Delete

Digital Filter

Single image, Multi-image display (6, 12, 20, 35, and

80 thumbnails), Image magnification (Up to 16×,

Quick Zoom), Grid Display (4×4 Grid, Golden

Section, Scale, Square 1, Square 2, Grid Color:

Black, White), Rotated image display, Histogram

Display (Y histogram, RGB histogram), Highlight

Alert, Auto Image Rotation, Detailed Information

Display, Copyright Information (Photographer,

Longitude, Altitude, Coordinated Universal Time

(UTC)), Direction, Folder Display, Calendar Filmstrip

Display, Slideshow

Single image, all images, select & delete, folder,

Instant Review image

Base Parameter Adj, Extract Color, Replace Color,

Toy Camera, Retro, High Contrast, Shading, Invert

Color, Unicolor Bold, Bold Monochrome, Tone

Expansion, Sketch, Water Color, Pastel,

Posterization, Miniature, Soft, Starburst, Fish-eye,

Slim, Monochrome

RAW

Development

Editing Features

Development options: Select single image, Select multiple images, Select a folder

Development parameters: White Balance, Custom

Image, Sensitivity, Clarity, Skin Tone, Digital Filter,

HDR Capture, Pixel Shift Resolution, Shadow

Correction, High-ISO NR, Distortion Correction,

Peripheral Illumination Correction, Lateral Chromatic

Aberration Adjustment, Diffraction Correction, Color

Fringe Correction, File Format (JPEG, TIFF), Aspect

Ratio, JPEG Recorded Pixels, JPEG Quality, Color

Space

Image Rotation, Color Moiré Correction, Resize,

Cropping (aspect ratio can be changed and tilt correction is available), Movie Edit (dividing a movie file and deleting unwanted segments), Capturing a

JPEG still picture from a movie, Save RAW Data

Customization

USER Modes

Function Dial

Up to 5 settings can be saved.

C1, C2, C3

Assignable items: Sensitivity, EV Compensation,

Bracket Value, Custom Image, AF Mode, AF Active

Area, Focus Peaking, Program Line, Shutter Mode

Selection, Recorded Pixels (Still picture: q , p , o , r ; Movie: u , t ), AA Filter Simulator, Grid

Display, LCD Display Options, Image Magnification,

Outdoor View Setting

Custom Functions 24 items

Mode Memory 18 items

Button

Customization

AF Customization

X button: EV Compensation, Sensitivity, Preview,

AE Lock, Change AF Area, One Push File Format,

Electronic Level, Wi-Fi, Night Vision LCD Display,

Operation Control Lock

Y / Z button: EV Compensation, Sensitivity,

Preview, AE Lock, Change AF Area, One Push File

Format, Electronic Level, Operation Control Lock f button: Enable AF1, Enable AF2, Cancel AF,

AE Lock

E-dials (front/rear): customizable to each exposure mode

AF.S Setting: Focus-priority, Release-priority

1st Frame Action in AF.C: Auto, Focus-priority,

Release-priority

Action in AF.C Continuous: Auto, Focus-priority,

FPS-priority

Hold AF Status: Off, Low, Medium, High

AF in Interval Shooting: Locks focus at 1st exposure,

Adjusts focus for each shot

129

Enable/Disable

Control

Text Size

World Time

AF Fine

Adjustment

Indicator Lamps

Information

Type1: Disables exposure control operations in standby mode

Type2: Disables the control functions of ABCD ,

E , and F in standby mode

Standard, Large

World Time settings for 75 cities (28 time zones)

±10 steps, uniform adjustment for all lenses or individual adjustment for each lens (up to 20 values can be saved)

Self-timer: On, Off

GPS LED Indicators: On, Off

Names of “Photographer” and “Copyright Holder” are embedded to the image file. A revision history can be checked using the provided software.

Power Supply

Battery Type

AC Adapter

Battery Life

Rechargeable Lithium-ion Battery D-LI109

AC Adapter Kit K-AC167 (optional)

Number of recordable images (with 50% flash usage): approx. 390 images

(without flash usage): approx. 420 images

Playback time: approx. 270 minutes

• Tested in compliance with CIPA standard using a fully charged lithium-ion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances.

Interfaces

Connection Port

USB 2.0 (micro B), external power supply terminal, stereo microphone/cable release input terminal

(ø3.5 mm connector)

USB Connection MSC/PTP

Video Output

USB/Video output terminal

• SlimPort

-to-HDMI

adapter required

Wireless LAN

Standards

Frequency

(Center

Frequency)

Security

IEEE 802.11b/g/n (standard wireless LAN protocol)

2412 to 2462 MHz (channels: Ch 1 to Ch 11)

Authentication: WPA2

Encryption: AES

130

Dimensions and Weight

Dimensions

Weight

Approx. 131.5 mm (W) × 101.0 mm (H) × 76.0 mm

(D) (excluding protrusions)

Approx. 703 g (including dedicated battery and an

SD Memory Card)

Approx. 643 g (body only)

Operating Environment

Temperature

Humidity

-10 to 40°C (14 to 104°F)

85% or less (no condensation)

Included Accessories

Package

Contents

Software

Strap O-ST162, Rechargeable Lithium-ion Battery

D-LI109, Battery Charger D-BC109, AC plug cord,

Software (CD-ROM) S-SW167, Operating Manual

<Mounted to the camera> Eyecup F

, Hot shoe cover

, Body mount cap K II , Triangular ring and protective cover, Grip S O-GP167, Battery grip terminal cover

Digital Camera Utility 5

Optional Accessories

GPS Unit

Cable Release

Battery Grip

Grip

O-GPS1: GPS information (Latitude, Longitude,

Altitude, Coordinated Universal Time (UTC)),

Direction, Electronic Compass, ASTROTRACER

Cable Switch CS-310

D-BG7

Grip S: O-GP167

Grip M: O-GP1671

Grip L: O-GP1672

Approximate Image Storage Capacity and

Playback Time

(When using the fully charged battery)

Battery

Temperature

Normal

Shooting

Flash Photography

50%

Use

100%

Use

Playback

Time

D-LI109 23°C

420 390 360

270 minutes

• Tested in compliance with CIPA standard using a fully charged lithiumion battery at a temperature of 23°C. Actual results may vary depending on the shooting conditions/circumstances.

Approximate Image Storage Capacity by Size

(When using an 8 GB memory card)

Recorded

Pixels q

24M p 14M o 6M r 2M m

527

889

1964

4723

JPEG Quality l

1192

1996

4309

9824 k

2339

3837

7923

16374

PEF

151

–

• The number of storable images may vary depending on the subject, shooting conditions, selected capture mode, and memory card, etc.

List of World Time Cities

The following cities can be set as Hometown and Destination.

Region

North

America

City

Honolulu, Anchorage, Vancouver, San

Francisco, Los Angeles, Calgary, Denver,

Chicago, Miami, Toronto, New York, Halifax

Central and South

America

Mexico City, Lima, Santiago, Caracas, Buenos

Aires, Sao Paulo, Rio de Janeiro

Europe

Africa/

West Asia

East Asia

Oceania

Lisbon, Madrid, London, Paris, Amsterdam,

Milan, Rome, Copenhagen, Berlin, Prague,

Stockholm, Budapest, Warsaw, Athens, Helsinki,

Moscow

Dakar, Algiers, Johannesburg, Istanbul, Cairo,

Jerusalem, Nairobi, Jeddah, Tehran, Dubai,

Karachi, Kabul, Male, Delhi, Colombo,

Kathmandu, Dacca

Yangon, Bangkok, Kuala Lumpur, Vientiane,

Singapore, Phnom Penh, Ho chi Minh, Jakarta,

Hong Kong, Beijing, Shanghai, Manila, Taipei,

Seoul, Tokyo, Guam

Perth, Adelaide, Sydney, Noumea, Wellington,

Auckland, Pago Pago

131

Operating Environment for USB Connection and Provided Software

With the provided software “Digital Camera Utility 5”, you can develop RAW images, make color adjustments, or check shooting information on a computer. Install the software from the provided CD-ROM (S-SW167).

We recommend the following system requirements to connect the camera to a computer with a commercially available USB cable and to use the software.

Windows

CPU

Windows

® bit, 64-bit), Windows

Windows

10 (32-bit, 64-bit), Windows

7 (32-bit, 64-bit)

8.1 (32-

8 (32-bit, 64-bit), or

Intel

Core™ 2 Duo or higher

RAM

HDD

4 GB or more

For installing and starting up the program:

Approx.100 MB or more of available space

For saving image files: Approx. 10 MB/file (JPEG),

Approx. 30 MB/file (RAW)

Monitor

1280×1024 dots, 24-bit full color or higher

Macintosh

CPU

RAM

OS X 10.12, OS X 10.11, OS X 10.10, OS X 10.9, or OS X 10.8

Intel

Core™ 2 Duo or higher

4 GB or more

HDD

For installing and starting up the program:

Approx.100 MB or more of available space

For saving image files: Approx. 10 MB/file (JPEG),

Approx. 30 MB/file (RAW)

Monitor

1280×1024 dots, 24-bit full color or higher t

Memo

• Application software that supports both MOV (MPEG-4AVC/

H.264) and AVI (Motion JPEG) formats is required to play back movie files transferred to a computer.

132

Index

133

134

Delete .............................. 47

Deleting all images .......... 31

Deleting selected images

........................................ 82

Depth of field ................... 51

Depth of Field Bracketing 67

Destination .................... 114

Detailed Information Display

........................................ 17

Developing RAW images

........................................ 90

Dial .................................. 11

Dial indicator.................... 45

Diffraction Correction....... 77

Digital Camera Utility 5

................................ 91, 132

Digital Filter ............... 75, 87

Digital Preview............... 104

Diopter adjustment lever

........................................ 19

Direct keys....................... 20

Disabling dial and button operations........................ 51

Display Color ................... 43

Distortion Correction........ 77

DNG ................................ 48

D-Range Settings ............ 76

Drive Mode ...................... 64

DST (daylight saving time)

................................ 42, 114

Dust Removal ................ 123

Dynamic range ................ 76

E

E-dial ............................. 106

Editing images ................. 86

Electronic Compass

................................ 16, 121

Electronic Level ......... 16, 20

Electronic Shutter ............ 52

Enable/Disable Control.... 51

Error messages ............. 125

EV Compensation ........... 56

EV Steps ......................... 50

Exif data ........................ 113

Expanded Area AF (AF

Active Area) ..................... 60

Exposure modes ..... 49, 109

External flash................. 120

Extract Color (Digital Filter)

.................................. 75, 87

F

Face Detection (AF Active

Area)................................ 62

File Format ...................... 48

File Name ...................... 112

File No. .......................... 113

Filter .......................... 75, 87

Firmware Info/Options ..... 33

Fish-eye (Digital Filter) .... 87

Flash........................ 57, 120

Flash compensation ........ 58

Flash On.......................... 57

Flash On + Red-eye ........ 57

Flat (Custom Image)........ 74

Flicker Reduction............. 26

Fluorescent - Cool White

(White Balance)............... 72

Fluorescent - Daylight Color

(White Balance)............... 72

Fluorescent - Daylight White

(White Balance)............... 72

Fluorescent - Warm White

(White Balance)............... 72

Focus indicator ................ 45

Focus Method.................. 59

Focus Peaking................. 61

Folder display .................. 83

Folder Name.................. 111

Format ............................. 44

Four-way controller.... 12, 20

Framerate ........................ 48

Function Dial ........... 21, 105

Fx1/Fx2/Fx3 button ....... 102

G

GPS Time Sync ............. 121

GPS unit ........................ 121

GPS/E-Compass ........... 121

Grid Display ............... 26, 47

Grip.................................. 36

Guide Display .................. 45

Guide number.................. 58

H

HDMI

terminal ............... 85

HDR Capture ................... 77

HDR LANDSCAPE .......... 48

High Contrast (Digital Filter)

.................................. 75, 87

High-ISO NR ................... 55

Highlight Alert ............ 17, 26

Highlight Correction ......... 76

High-speed Sync flash .. 120

Histogram Display ..... 18, 26

Hold AF Status ................ 59

Hometown ............... 42, 114

Horizon Correction .......... 26

Hot shoe .......................... 10

I

Image Capture Settings... 48

Image finishing tone ........ 74

Image plane indicator ...... 10

Image Rotation ................ 84

Image storage capacity

...................................... 131

Image Sync ..................... 94

IMAGE Transmitter 2....... 93

Image View (Image Sync)

........................................ 94

Indicator Lamps ............. 108

Initial settings................... 42

Initializing a memory card

........................................ 44

Input Focal Length......... 119

Instant Review ........... 26, 45

Interval Composite........... 70

Interval Movie Record...... 70

Interval Shooting.............. 70

Interval Shooting Options

........................................ 71

Invert Color (Digital Filter)

.................................. 75, 87

ISO AUTO Setting ........... 55

ISO sensitivity.................. 54

J

JPEG ............................... 48

JPEG Quality ................... 48

JPEG Recorded Pixels .... 48

K

Kelvin............................... 73

L

Landscape (Custom Image)

........................................ 74

Language/ W ................ 42

Language setting ............. 42

Lateral Chromatic Aberration

Adjustment....................... 77

LCD Display............... 31, 43

LCD Display Settings..... 107

Lens......................... 37, 116

Lens Correction ............... 77

Lens focal length ........... 119

Lens information contacts

........................................ 10

Lens mount index ............ 37

Lens unlock button .......... 37

Lens with aperture ring .. 118

Link AE and AF Point ...... 57

Live View ......................... 14

M

L mode .......................... 49

Macintosh ...................... 132

MACRO ........................... 48

Magnifying images .... 46, 47

Manual Exposure ............ 49

Manual Flash Discharge.. 57

MANUAL LENS ............... 48

Manual White Balance .... 73

Mechanical Shutter.......... 52

Memory ......................... 110

Memory card ................... 40

Menu ............................... 23

Meter Operating Time ..... 19

Microphone................ 10, 53

Microphone terminal........ 53

Microphone/cable release terminal............................ 10

Miniature (Digital Filter) ... 87

Mired ............................... 73

Mirror ............................... 10

Mirror Lock-up Shooting .. 69

Mode dial......................... 45

Mode dial lock button ...... 45

Moiré reduction................ 79

Monitor ...................... 13, 41

Monochrome (Custom

Image) ............................. 74

Monochrome (Digital Filter)

........................................ 87

Motion Bracketing............ 68

Mount type..................... 116

Movie Edit........................ 89

Movie menus ................... 29

Movie mode ..................... 52

Movie SR......................... 29

MSC ................................ 92

Multi Auto White Balance

(White Balance) ............... 72

Multi-exposure ................. 69

Multi-image display.......... 82

Multiple AF Points (AF Active

Area)................................ 62

Multi-segment metering ... 57

Muted (Custom Image).... 74

N

Natural (Custom Image) .. 74

Night Vision LCD Display

...................................... 122

Noise Reduction ........ 50, 55

O

One Push File Format ... 103

One-Push Bracketing ...... 66

Operating environment .. 132

Optical Preview ............. 104

Other Display Settings..... 27

Outdoor View Setting .... 108

P

G mode .......................... 49

Pastel (Digital Filter) ........ 87

PEF ................................. 48

Peripheral Illumination

Correction ........................ 77

Phase-matching AF ......... 59

Photographer................. 113

Pixel Mapping ................ 123

Pixel Shift Resolution ...... 78

Playback Info Display selection screen .............. 17

Playback menu ................ 31

Playback mode ................ 47

Playback mode palette .... 81

Playback Sound Volume

........................................ 54

Portrait (Custom Image) .. 74

Posterization (Digital Filter)

........................................ 87

Power .............................. 42

Precise Calibration ........ 121

Preview.................... 51, 104

Processing images .......... 86

Program Automatic Exposure

......................................... 49

Program Line ................... 50

Protect ........................... 110

Protect All Images ......... 110

Provided software.......... 132

PTP ................................. 92

Q

Quality ............................. 48

Quality level adjustment .. 78

Quick Zoom ..................... 47

R

Radiant (Custom Image)

........................................ 74

RAW ................................ 48

RAW Development .......... 90

RAW File Format ............. 48

Rec. Mode menus ........... 24

Recordable time .............. 52

Recorded Pixels .............. 48

Recording Sound Level ... 53

Release While Charging.. 58

Remote Capture (Image

Sync) ............................... 94

Replace Color (Digital Filter)

.................................. 75, 87

Reset ......................... 33, 35

Resize ............................. 86

Retractable lens .............. 46

Retro (Digital Filter) ... 75, 87

Reversal Film (Custom

Image) ............................. 74

RGB histogram ................ 18

Rotating images .............. 84

Rotation Direction .......... 107

S

Save as Manual WB........ 73

Save Cross Processing ... 75

Save Menu Location........ 23

Save RAW Data ........ 45, 47

Save Rotation Info ........... 84

Save USER Mode ......... 108

Scene Analyze Auto mode

........................................ 44

SD Memory Card............. 40

Select (AF Active Area)

.................................. 60, 62

Select Battery .................. 39

Self-timer ......................... 65

Self-timer lamp ................ 10

Sensitivity ........................ 54

Sensitivity Priority Automatic

Exposure ......................... 49

Sensitivity Steps .............. 54

Sensor Cleaning ............ 124

Sequential Numbering ... 113

Setting dial....................... 21

Set-up menus .................. 32

Shade (White Balance).... 72

Shading (Digital Filter)

.................................. 75, 87

Shadow Correction .......... 76

Shake Reduction ............. 26

Sharpness (Custom Image)

........................................ 74

Shooting .......................... 44

Shooting celestial bodies

...................................... 121

Shooting Info Display....... 16

Shooting with Live View... 46

Shooting with viewfinder.. 44

Shutter & Aperture Priority

Automatic Exposure ........ 49

Shutter Mode Selection ... 52

Shutter Priority Automatic

Exposure ......................... 49

135

136

Shutter speed .................. 49

Single Frame Shooting.... 64

Single image display

.................................. 17, 47

Single mode (AF Mode) .. 60

Sketch (Digital Filter) ....... 87

Skin Tone ........................ 78

Slideshow ........................ 84

Slim (Digital Filter) ........... 87

SlimPort

......................... 85

Slow Shutter Speed NR .. 50

Slow Sync + Red-eye ...... 57

Slow-speed Sync............. 57

Smart Function ........ 21, 105

Smartphone ..................... 93

Soft (Digital Filter)............ 87

Sound .............................. 52

Sound Effects .................. 32

Speaker ........................... 10

Specifications ................ 126

Spot (AF Active Area)

.................................. 60, 62

Spot metering .................. 57

sRGB............................... 48

Standby mode ................. 13

Star Stream ..................... 70

Starburst (Digital Filter) ... 87

Status Screen .................. 14

Strap ................................ 36

Strap lug .......................... 36

Superimpose AF Area ..... 19

H mode ........................ 49

Switch.............................. 11

T

K mode........................ 49

Tethered shooting ........... 93

Text input............... 109, 111

Text Size ......................... 42

Texture adjustment.......... 78

Thumbnail display ..... 47, 82

TIFF ................................. 90

Time Setting .................. 114

Timed exposure............... 51

Tone Expansion (Digital

Filter) ............................... 87

Toy Camera (Digital Filter)

.................................. 75, 87

Tracking (AF Active Area)

........................................ 62

Trailing Curtain Sync ....... 57

TTL phase-matching AF

........................................ 59

Tungsten (White Balance)

........................................ 72

I bracketing ................. 68

I mode......................... 49

U

Unicolor Bold (Digital Filter)

.................................. 75, 87

USB Connection ...... 92, 132

USB terminal ................... 92

USB/video output terminal

........................................ 10

User registration ................ 9

Using Aperture Ring ...... 118

V

Vibrant (Custom Image) .. 74

Video Out Resolution ...... 85

Viewfinder........................ 19

Viewfinder Overlay .......... 26

Volume ............................ 32

Volume label.................... 44

W

WARRANTY POLICY.... 141

Water Color (Digital Filter)

........................................ 87

WB Adjustable Range ..... 72

WB When Using Flash .... 72

White Balance ................. 72

Wi-Fi™ ............................ 93

Windows

...................... 132

Wireless flash discharge

........................................ 57

Wireless LAN................... 93

World Time .................... 114

Z

Zone Select (AF Active Area)

........................................ 60

Care to be Taken During Handling

Before Using Your Camera

• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (memory cards), etc.

About the Battery and Charger

• To keep the battery in optimum condition, avoid storing it in a fully charged state or in high temperatures.

• If the battery is left inserted and the camera is not used for a long time, the battery will over-discharge and shorten the battery’s life.

• Charging the battery a day before use or on the day of use is recommended.

• The AC plug cord provided with this camera is developed exclusively for the battery charger D-BC109. Do not use it with other devices.

•

Class II equipment: The provided battery charger is a Class II

(double-insulated) product.

Precautions on Carrying and Using Your Camera

• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is -10°C to 40°C (14°F to 104°F).

• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.

• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.

• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after temperatures of the camera and surroundings are equalized.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt.

These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops immediately.

• Do not attach or remove a lens when there are any rain or water drops on the camera. If water enters the camera or the lens, a malfunction may occur.

• Do not press on the monitor with excessive force. This could cause it to break or malfunction.

• Be careful not to overtighten the screw in the tripod socket when using a tripod.

Cleaning Your Camera

• Do not clean the camera with organic solvents such as thinner, alcohol, and benzine.

• Use a lens brush to remove dust accumulated on a lens. Never use a spray blower for cleaning as it may damage the lens.

• Please contact your nearest service center for professional cleaning of the CMOS sensor. (This will involve a fee.)

• Periodic inspections are recommended every one to two years to maintain high performance.

Storing Your Camera

• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.

Remove the camera from its case and store it in a dry and well-ventilated place.

• Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.

• Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.

About SD Memory Cards

• The SD Memory Card is equipped with a write-protect switch. Setting the switch to

LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or a

Write-protect switch computer.

• The SD Memory Card may be hot when removing the card immediately after using the camera.

• Do not remove the SD Memory Card or turn off the power while the card is being accessed. This may cause the data to be lost or the card to be damaged.

• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.

• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.

137

• Data on the SD Memory Card may be deleted in the following circumstances. We do not accept any liability for data that is deleted if

1. the SD Memory Card is mishandled by the user.

2. the SD Memory Card is exposed to static electricity or electrical interference.

3. the SD Memory Card has not been used for a long time.

4. the SD Memory Card or the battery is removed while the card is being accessed.

• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.

• Format new SD Memory Cards. Also format SD Memory Cards previously used with other cameras.

• Please note that deleting data stored on an SD Memory Card, or formatting an SD Memory Card does not completely erase the original data. Deleted data can sometimes be recovered using commercially available software. If you are going to discard, give away or sell your SD

Memory Card, you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information.

• The data on your SD Memory Card should be managed at your own risk.

About the Wireless LAN Function

• Do not use the camera in a place where electrical products, AV/OA devices, and so on generate magnetic fields and electromagnetic waves.

• If the camera is affected by magnetic fields and electromagnetic waves, it may not be able to communicate.

• If the camera is used near a TV or a radio, poor reception or TV screen glitch may occur.

• If there are multiple wireless LAN access points near the camera and the same channel is used, search operation may not be executed correctly.

• The security of your data stored, sent or received is your own responsibility.

In the frequency band used by the camera, along with industrial, scientific, and medical devices such as microwave ovens, premises radio stations (wireless stations requiring license) and specified low power radio stations (wireless stations not requiring license) for mobile object identification used in factory production lines, etc., and amateur radio stations (wireless stations requiring license) are operated.

1. Before using the camera, confirm that premises radio stations and specified low power radio stations for mobile object identification and amateur radio stations are not operated in the vicinity.

2. In the event that the camera causes harmful radio wave interference to premises radio stations for mobile object identification, immediately change the frequency being used to avoid interference.

3. If you have other troubles such that the camera causes harmful radio wave interference to specified low power radio stations for mobile object identification or to amateur radio stations, contact your nearest service center.

This camera conforms to the technical standards under the Radio Law and

Telecommunications Business Law and the certification of conformance to technical standards can be displayed on the monitor.

The certification marks of conformance to wireless technical standards under the Radio Law and Telecommunications Business Law can be displayed from [Certification Marks] of the D

5 menu. Refer to “Using the

Menus” (p.23) for how to use the menus.

138

Trademarks

• Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States of America and other countries.

• Macintosh, macOS, OS X, and App Store are trademarks of Apple Inc., registered in the U.S. and other countries.

• Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/ or other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• Google, Google Play, and Android are trademarks or registered trademarks of Google Inc.

• Wi-Fi is a registered trademark of Wi-Fi Alliance.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

• This product includes DNG technology under license by Adobe Systems

Incorporated.

• The DNG logo is either a registered trademark or trademark of Adobe

Systems Incorporated in the United States and/or other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the

United States and/or other countries.

• Analogix and SlimPort are trademarks or registered trademarks of

Analogix Semiconductor, Inc.

• MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL, LLC in the United States and other countries.

All other trademarks are the property of their respective owners.

• This product uses the RICOH RT font designed by Ricoh Company Ltd.

• This product supports PRINT Image Matching III. PRINT Image

Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image

Matching III compliant.

Image Matching is a trademark of Seiko Epson Corporation. The PRINT

Image Matching logo is a trademark of Seiko Epson Corporation.

139

AVC Patent Portfolio License

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard

(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com.

Announcement on the Use of BSD-Licensed Software

This product includes software licensed under the BSD License. BSD license is a form of license which permits the redistribution of the software provided that it is clearly stated that use is unwarranted, and a copyright notice and a list of licensing conditions are provided. The following contents are displayed based on the abovementioned licensing conditions and are not for the purpose of restricting your use of the product, etc.

Tera Term

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

140

WARRANTY POLICY

All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the camera does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized service facilities.

Procedure During 12-month Warranty Period

Any camera which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the camera or to the manufacturer. If there are no representatives of the manufacturer in your country, send the camera to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the camera can be returned to you owing to the complicated customs procedures required. If the camera is covered by warranty, repairs will be made and parts replaced free of charge, and the camera will be returned to you upon completion of servicing. If the camera is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your camera was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your camera returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your camera for at least a year. Before sending your camera for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

•

This warranty policy does not affect the customer’s statutory rights.

•

The local warranty policies available from our distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact our distributor in your country for more information and to receive a copy of the warranty policy.

141

For customers in USA

STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help.

FOR CALIFORNIA, U.S.A. ONLY

Perchlorate Material-special handling may apply.

The lithium battery used in this camera contains perchlorate material, which may require special handling.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We:

Located at:

RICOH IMAGING AMERICAS

CORPORATION

5 Dedrick Place, West Caldwell,

New Jersey 07006, U.S.A.

Phone: 800-877-0155

FAX: 973-882-2008

Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name:

Model Number:

Contact person:

Date and Place:

SLR Digital Camera

PENTAX KP

Customer Service Manager

January, 2017 Colorado

142

For customers in Canada

Industry Canada (IC) Compliance Notice

This Class B digital apparatus complies with Canadian ICES-

003 (B).

This device complies with Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The KP has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

Pour les utilisateurs au Canada

Industrie Canada (IC) Avis de Conformité

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 (B) du Canada.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun problème de santé associé à l’usage des appareils sans fil à faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil

à faible puissance sont entièrement sans danger. Les appareils sans fil à faible puissance émettent une énergie fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut avoir des effets sur la santé (en chauffant les tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur n’a pas de mauvais effets connus sur la santé. De nombreuses

études ont été menées sur les expositions aux RF faibles et n’ont découvert aucun effet biologique. Certaines études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés par des recherches supplémentaires. Le KP a été testé et jugé conforme aux limites d’exposition aux rayonnements IC énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC.

143

For Customers in Europe

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

1. In the European Union

These symbols on the products, packaging and/ or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste.

Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.

By disposing of these products correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

If a chemical symbol is added beneath the symbol shown above, in accordance with the Battery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a concentration above an applicable threshold specified in the Battery Directive.

For more information about collection and recycling of used products, please contact your local authorities, your waste disposal service or the point of sale where you purchased the products.

2. In other countries outside the EU

These symbols are only valid in the European Union. If you wish to discard used products, please contact your local authorities or dealer and ask for the correct method of disposal.

144

For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.

Notice to Users in EEA Countries

This product complies with the essential requirements and provisions of RE Directive 2014/53/EU.

The CE Declaration of Conformity is available by accessing the

URL: http://www.ricoh-imaging.co.jp/english/support/ declaration_of_conformity.html

and selecting the product applicable.

Operating frequency band: 2400 MHz - 2483.5 MHz

Maximum radio-frequency power: 8.16 dBm EIRP

European importer: RICOH IMAGING EUROPE S.A.S.

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

Manufacturer: RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

The CE Mark is a Directive conformity mark of the

European Union.

e_kb581_cover_6mm.fm Page 2 Thursday, December 8, 2016 9:51 AM

For Using Your Camera Safely

We have paid close attention to the safety of this camera. When using this camera, we request your special attention regarding items marked with the following symbols.

Warning

This symbol indicates that ignoring this item could cause serious personal injuries.

Caution

This symbol indicates that ignoring this item could cause minor or medium personal injuries, or loss of property.

About the Camera

Warning

• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.

• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.

• Do not aim the camera at the sun or other strong light sources when taking pictures or leave the camera sitting in direct sunlight with a lens cap off. Doing so may cause the camera to malfunction or cause a fire.

• Do not look at the sun or other strong light sources through a lens. Doing so may lead to a loss of eyesight or cause vision to be impaired.

• If any irregularities occur during use, such as smoke and a strange odor, stop using the camera immediately, remove the battery or the AC adapter, and contact your nearest service center. Continued use can cause a fire or electric shock.

Caution

• Do not place your finger over the flash when discharging the flash. You may burn yourself.

• Do not cover the flash with clothing when discharging the flash.

Discoloration may occur.

• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.

• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.

• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.

About the Battery Charger and AC Adapter

Warning

• Always use the battery charger and AC adapter exclusively developed for this camera, with the specified power and voltage. Using a battery charger or AC adapter not exclusive to this camera, or using the exclusive battery charger or AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. The specified voltage is 100 - 240V AC.

• Do not disassemble or modify the product. This can cause a fire or electric shock.

• If the generation of smoke or strange odor from the product or other abnormality occurs, immediately discontinue using and consult your nearest service center. Continued use can cause a fire or electric shock.

• If water should happen to get inside the product, consult your nearest service center. Continued use can cause a fire or electric shock.

• If you see a lightning flash or hear thunder during use of the battery charger or AC adapter, unplug the power plug and discontinue using.

Continued use can cause damage to the product, fire or electric shock.

• Wipe off the power plug if it should become covered with dust.

Accumulated dust may cause a fire.

• To reduce the risk of hazards, use only CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified

NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.

Caution

• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult your nearest service center.

• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.

• Do not handle the power plug with wet hands. This can cause an electric shock.

• Do not drop the product, or subject it to violent impact. This can cause the product to breakdown.

• Do not use the battery charger D-BC109 to charge batteries other than the rechargeable lithium-ion battery D-LI109. Attempting to charge other types of batteries may cause an explosion or heating, or may damage the battery charger.

Memo

e_kb581_cover_6mm.fm Page 1 Thursday, December 8, 2016 9:51 AM

RICOH IMAGING COMPANY, LTD.

RICOH IMAGING EUROPE

S.A.S.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

(http://www.ricoh-imaging.co.jp)

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

(http://www.ricoh-imaging.eu)

RICOH IMAGING AMERICAS

CORPORATION

5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.

(http://www.us.ricoh-imaging.com)

RICOH IMAGING CANADA

INC.

5520 Explorer Drive Suite 300, Mississauga, Ontario, L4W 5L1, CANADA

(http://www.ricoh-imaging.ca)

RICOH IMAGING CHINA CO.,

LTD.

23D, Jun Yao International Plaza, 789 Zhaojiabang Road, Xu Hui District,

Shanghai, 200032, CHINA

(http://www.ricoh-imaging.com.cn)

http://www.ricoh-imaging.co.jp/english

This contact information may change without notice.

Please check the latest information on our websites.

SLR Digital Camera

Operating Manual

• Specifications and external dimensions are subject to change without notice.

R01DTL16 Printed in Philippines

Restrictions on the Combinations of Special Functions

Functions Available with Various

Lenses

Using the Aperture Ring

4

Performing Catch-in Focus Shooting

4

Setting the Focal Length

4

Functions when Using an

External Flash

Using the GPS Unit

Shooting Celestial Bodies

3

Troubleshooting

Sensor Cleaning

5

Error Messages

Main Specifications

Operating Environment for USB Connection and Provided Software

Index

Symbols

Numerics

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

Z

Care to be Taken During Handling

WARRANTY POLICY

According to 47CFR, Parts 2 and 15 for

We:

Located at:

RICOH IMAGING AMERICAS

CORPORATION

5 Dedrick Place, West Caldwell,

New Jersey 07006, U.S.A.

Phone: 800-877-0155

FAX: 973-882-2008

Product Name:

Model Number:

Contact person:

Date and Place:

SLR Digital Camera

PENTAX KP

Customer Service Manager

January, 2017 Colorado

For Using Your Camera Safely

RICOH IMAGING COMPANY, LTD.

RICOH IMAGING EUROPE

S.A.S.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN

(http://www.ricoh-imaging.co.jp)

Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,

94513 Rungis Cedex, FRANCE

(http://www.ricoh-imaging.eu)

RICOH IMAGING AMERICAS

CORPORATION

5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A.

(http://www.us.ricoh-imaging.com)

RICOH IMAGING CANADA