advertisement
OTHER SETTINGS
Picture Adjustment
DTV ATV
You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture menu.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Picture”, then press [OK] .
“Picture Mode”
3) Press [
K
/
L
] to select “Picture Mode”.
4) Press
[
0
/
1
]
to select the setting (“Standard, Dynamic,
Movie, News, Personal”) you want.
Picture
Sound
TV
Setup
Parental
Picture
Picture Mode
Brightness
Contrast
Colour
Hue
Sharpness
Colour Temperature
Features
Standard
Normal
50
75
50
0
4
Select
BACK
Back
“Colour Temperature”
3) Press [
K
/
L
] to select “Colour Temperature”.
4) Press
[
0
/
1
]
to select the setting (“Cool, Normal, Warm”) you want.
Standard Picture
Sound
TV
Setup
Parental
Picture
Picture Mode
Brightness
Contrast
Colour
Hue
Sharpness
Colour Temperature
Features
Normal
Select
BACK
Back
50
75
50
0
4
5) Press [MENU] to exit.
“Brightness, Contrast, Colour, Hue, Sharpness”
3) Press [
K
/
L
] to select the item you want, then press [OK] .
Note: Press
[
K
/
L
]
to change the items.
4) Press [
0
/
1
] to adjust, then press [OK] .
Note: • When this unit is connected to PC, you can not select
“Colour”, “Hue” and “Sharpness”.
• If you adjust the settings in other than “Personal” mode, “Picture Mode” will be changed to “Personal”.
Brightness
Brightness
Contrast
Contrast
Colour
Colour
Hue
Hue
Sharpness
Sharpness
Setting
50
75
50
0
4
[
0
] decrease brightness decrease contrast decrease colour add red make soft
[
1
] increase brightness increase contrast increase colour add green make clear
EN
16
Advanced Picture Adjustment
DTV ATV
You can adjust the detailed picture settings according to your personal preference.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Picture”, then press [OK] .
3) Press
[
K
/
L
]
to select “Features”, then press
[OK]
.
• “Features” menu will appear.
Picture
Sound
TV
Setup
Parental
Features
DNR
CTI
Flesh Tone
Adaptive Luma Control
Backlight
Mid
Mid
On
On
100
Select
BACK
Back
“Flesh Tone”
You can set to activate the flesh colours or not.
4) Press
[
K
/
L
]
to select “Flesh Tone”.
5) Press [
0
/
1
] to select the setting (“On, Off ”) you want.
“Adaptive Luma Control”
You can adjust changes in the luminance of the picture.
4) Press [
K
/
L
] to select “Adaptive Luma Control”.
5)
5)
Press
Press
[
[
0
0
/
“Backlight”
/
1
1
]
]
to select the setting (“On, Off ”) you want.
4) Press
[
K
/
L
]
to select “Backlight”, then press
[OK]
.
to adjust, then press
Backlight
“DNR (Digital Noise Reduction)”
You can adjust to reduce the appearance of digitizing error caused by the compression.
4) Press [
K
/
L
] to select “DNR”.
5) Press [
0
/
1
] to select the setting (“Low, Mid, High”) you want.
“CTI (Colour Transient Intensity)”
You can adjust the picture for colour errors.
4) Press [
K
/
L
] to select “CTI”.
5) Press
[
0
/
1
]
to select the setting (“Low, Mid, High”) you want.
6) Press [MENU] to exit.
[OK] .
100
17
EN
PC Settings
You can adjust the PC screen position, clock and phase. Make sure your PC is connected.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “Picture”, then press
[OK]
.
3) Press [
K
/
L
] to select “PC Settings”, then press [OK] .
“Auto Adjustment”
4) Press [
K
/
L
] to select “Auto Adjustment”, then press [OK] .
Picture
Sound
Setup
Parental
Auto Adjustment
H.Position
V.Position
Phase
Clock
60
50
18
130
Sound Adjustment
DTV ATV
You can adjust the sound settings according to your personal preferences. These settings are automatically stored after exiting the sound menu.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “Sound”, then press
[OK]
.
• “Sound” menu will appear.
Picture
Sound
TV
Setup
Parental
Sound
Balance
Bass
Treble
Virtual Surround Sound
Sound Mode
Digital Audio Output
Auto Volume Control
Assistive Services
Visually Impaired
Off
Standard
PCM
Off
-
Adjust Select
BACK
Back
0
50
50
PC Settings Enter Select
BACK
Back
• Each setting will be adjusted automatically.
“H.Position, V.Position, Phase, Clock”
4) Press [
K
/
L
] to select the item you want, then press [OK] .
Note: Press [
K
/
L
] to change the items.
5) Press [
0
/
1
] to adjust, then press [OK] .
H.Position
H.Position
V.Position
Phase
V.Position
Phase
Clock
Clock
Setting
6) Press
[MENU]
to exit.
60
50
[
0
] move PC screen left move PC screen down
[
1
] move PC screen right move PC screen up
18 decrease setting value increase setting value
130
“Balance, Bass, Treble”
3) Press [
K
/
L
] to select the item you want, then press [OK] .
Note: Press [
K
/
L
] to change the items.
4) Press [
0
/
1
] to adjust, them press [OK] .
[
0
] [
1
]
Balance
Balance
Bass
Bass
Treble
Treble
Setting
0
50
50 decrease increase
“Virtual Surround Sound”
Virtual Surround Sound gives you the stereo phonic virtual space through your existing 2-channel stereo system.
3) Press
[
K
/
L
]
to select “Virtual Surround Sound”.
4) Press [
0
/
1
] to select the setting (“On, Off ”) you want.
“Sound Mode”
3) Press [
K
/
L
] to select “Sound Mode”.
4) Press
[
0
/
1
]
to select the setting (“Standard, Movie, Music,
News”) you want.
EN
18
“Digital Audio Output”
You can set the audio output to “Auto” or “PCM”.
3) Press
[
K
/
L
]
to select “Digital Audio Output”.
4) Press [
0
/
1
] to select the setting (“Auto, PCM”) you want.
Auto : Dolby Digital (if available)
PCM : PCM
“Auto Volume Control”
You can set to keep a constant loudness differential between the
TV commercials and the programs.
3) Press [
K
/
L
] to select “Auto Volume Control”.
4) Press [
0
/
1
] to select the setting (“On, Off ”) you want.
“Assistive Services”
DTV
You can adjust the audio type.
3) Press [
K
/
L
] to select “Assistive Services”.
4) Press
[
0
/
1
]
to select the setting (“-, Hearing Impaired,
Visually Impaired”) you want.
Visually Impaired : provides additional audio description for visually impaired.
Hearing Impaired : provides audio service for hearing impaired.
Note: If you select “Visually Impaired”, you can adjust the audio volume for “Visually Impaired”.
5) Press [MENU] to exit.
“Visually Impaired”
DTV
Make sure “Visually Impaired” is selected at “Assistive Services” setting.
3) Press [
K
/
L
] to select “Visually Impaired” then press [OK] .
4) Press
[
K
/
L
]
to select “Volume” then press
[OK]
.
5) Press [
0
/
1
] to adjust, then press [OK] .
Country Setting
Note: You may not select the country depending on the location you purchased.
DTV ATV
You can select the channels according to the country you select.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Country”.
4) Press
[
0
/
1
]
to select the country you want.
DTV
ATV
TV
Picture
Sound
TV
Setup
Parental
Country
Audio Language
Audio Language 2nd
Channel
France
English
English
Select
BACK
Back
TV
Picture
Sound
TV
Setup
Parental
Country
Audio Channel
Channel
5) Press [MENU] to exit.
France
Stereo
Select
BACK
Back
20 Volume
6) Press [MENU] to exit.
19
EN
Audio Language Selection
DTV ATV
You can select the main language.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
DTV
“Audio Language”
3) Press [
K
/
L
] to select “Audio Language”.
4) Press [
0
/
1
] to select the language you want.
TV
Picture
Sound
TV
Setup
Parental
Country
Audio Language
Audio Language 2nd
Channel
France
English
English
Select
BACK
Back
“Audio Language 2nd”
3) Press [
K
/
L
] to select “Audio Language 2nd”.
4) Press
[
0
/
1
]
to select the language you want.
Picture
Sound
TV
Setup
Parental
Country
Audio Language
Audio Language 2nd
Channel
France
English
English
TV Select
BACK
Back
5) Press [MENU] to exit.
Note: While watching a programme, you can change the audio language easily using [SOUND] when it is available.
Auto Scan
DTV ATV
You can scan the channels receivable in your area automatically.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Auto Scan”, then press
[OK]
.
• Scanning will start automatically.
Picture
Sound
TV
Setup
Parental
Auto Scan
Scanning
Analogue: 1
Digital: 8
60%
BACK
Cancel
• When the scanning is completed, “Scan Completed” message will appear.
• If you press [MENU] during the scanning, this operation will be stopped and the lowest memorised digital channel will be displayed.
• Please note that after tuning, the analogue channels will be stored in the order that they are broadcast by your local transmitter. This may not be in the same order in which you would like them to be stored. If this is the case, you can change the order according to your preference.
(Refer to “Channel Sort” on page 22.)
ATV
“Audio Channel”
3) Press [
K
/
L
] to select “Audio Channel”.
4) Press
[
0
/
1
]
to select the setting (“Dual1, Dual2, Stereo,
Mono”) you want.
Picture
Sound
TV
Setup
Country
Audio Channel
Channel
France
Stereo
Parental
TV Select
BACK
Back
Note: While watching a programme, you can change the audio mode easily using [SOUND] when it is available.
EN
20
Analogue Manual Scan Update Scan
ATV
You can adjust an analogue channel individually.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Manual Scan (Analogue)”, then press
[OK]
.
5) Press [the Number buttons] to enter the frequency.
• To select 24, enter [0] first, then press [2] and [4] .
6) Press [
K
/
L
] to select “Scan Up” or “Scan Down”, then press
[OK]
.
• Scanning will start automatically.
Picture
Sound
TV
Scanning (Analogue)
Setup
Parental
Start Frequency (MHz)
Scan Up
Scan Down
Manual Scan (Analogue)
45.00
BACK
Back
DTV ATV
You can scan the updated channels automatically.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Update Scan”, then press
[OK]
.
• Scanning will start automatically.
Picture
Sound
TV
Setup
Parental
Update Scan
Scanning
Analogue:
Digital: 8
1
60%
BACK
Cancel
• When this scanning is completed, “Scan Completed” message will appear.
5) Press
[MENU]
to exit.
• When this scanning is completed, “Scan Completed” message will appear.
7) Press
[MENU]
to exit.
Single RF Scan
DTV
You can adjust a digital channel individually.
1) Press [MENU] to display the menu.
2) Press [
K
/
L
] to select “TV”, then press [OK] .
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Single RF Scan”, then press
[OK]
.
5) Press [
0
/
1
] to select the channel number you want to scan, then press [OK] .
• Scanning will start automatically.
Picture
Sound
TV
Scanning (Digital)
Setup
Parental
Single RF Scan
Channel
Signal Strength
21
0%
60
Search
BACK
Back
• When this scanning is completed, “Scan Completed” message will appear.
6) Press [MENU] to exit.
Channel List
DTV ATV
You can easily find a channel you want.
1) Press [OK] while watching a programme.
• “Channel List” will appear.
Channel List
18 ETV
19 Euro CH
20 Drama Now!
21 WNS
22 BCT
25 Starcast
38 Eurasia Station
Page up Page down no icon
ATV
Digital radio service
DTV
2) Press [
K
/
L
] to select the channel you want to watch.
• Press [RED] or [GREEN] to move to the previous or next page.
• Press [OK] to watch the selected programme if it is currently available.
3) Press [BACK] to exit.
Note: You can edit the channel list.
(Refer to page 22 to page 23.)
21
EN
Channel Skip Channel Sort
DTV
When using
[
ATV
/
]
, the channel you selected will be skipped.
1) Press [MENU] to display the menu.
2) Press [
K
/
L
] to select “TV”, then press [OK] .
3) Press
[
K
/
L
]
to select “Channel”, then press
[OK]
.
4) Press [
K
/
L
] to select “Channel Skip”, then press [OK] .
• “Channel List” will appear.
5) Press [
K
/
L
] to select the channel you want to skip, then press [OK] .
• “ ”will appear on the right of the channel.
Picture
Sound
TV
Setup
Parental
Channel Skip
18
19
20
21
22
38
901
902
Digital
Digital
Digital
Digital
Digital
Digital
Analogue
Analogue
Set
ETV
Euro CH
Drama Now!
WNS
BCT
Eurasia Station
-----
-----
Select
BACK
Back
6) Press [MENU] to exit.
If you want to cancel
5) Press
[
K
/
L
]
to select the channel set to be skipped, then press
[OK]
.
• “ ”will disappear.
6) Press [MENU] to exit.
DTV ATV
You can change the channel order.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Channel Sort”, then press
[OK]
.
• “Channel List” will appear.
5) Press [
K
/
L
] to select the channel you want to move, then press [OK] .
• “
✔
” will appear on the right of the channel.
Picture
Sound
TV
Setup
Parental
Channel Sort
18
19
Digital
Digital
20
21
22
38
Digital
Digital
Digital
901
902
Digital
Analogue
Analogue
Set
ETV
Euro CH
Drama Now!
WNS
BCT
Eurasia Station
-----
-----
Select
BACK
Back
6) Press [
K
/
L
] to select the channel you want to switch, then press [OK] .
• The channel order will be changed.
7) Press [MENU] to exit.
EN
22
Channel Edit
DTV ATV
You can edit channel information.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Channel Edit”, then press
[OK]
.
• “Channel List” will appear.
Picture
Sound
TV
Setup
Parental
Channel Edit
18
19
20
21
22
38
901
902
Digital
Digital
Digital
Digital
Digital
Digital
Analogue
Analogue
Enter
ETV
Euro CH
Drama Now!
WNS
BCT
Eurasia Station
-----
-----
Select
BACK
Back
5) Press
[
K
/
L
]
to select the channel you want to edit, then press
[OK]
.
6) Press [
K
/
L
] to select your desired item.
Picture
Sound
TV
Setup
Parental
Channel Edit
Channel Number:
Name:
Frequency:
Colour System
Sound System
Set
802
TVE I
77.3
Auto
D/K
Select
BACK
Back
“Channel Number”
7) Press [the Number buttons] to enter a channel number you want, then press [OK] .
“Name”
7) Press
[the Number buttons]
to enter a channel name you want, then press
[OK]
.
(Refer to the following character table.)
“Frequency”
7)
8)
ATV
7) Press [the Number buttons] to enter a frequency you want, then press [OK] .
“Colour System , Sound System”
ATV
Press
Press
[
0
/
1
] to select the setting you want.
[MENU] to exit.
Channel Decode
ATV
Some TV stations transmit encoded TV signals which can only be viewed with a purchased or hired decoder. You can connect such a decoder to SCART jack of the unit. This function will automatically activate the connected decoder for the channel.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press
[
K
/
L
]
to select “Channel Decode”, then press
[OK]
.
• “Channel List” will appear.
5) Press [
K
/
L
] to select the channel you want to allocate the decoder, then press [OK] .
• “ ”will appear on the right of the channel.
Picture
Sound
TV
Setup
901
902
Analogue
Analogue
Parental
Channel Decode
-----
-----
Set Select
BACK
Back
1 A
2 D
3 G
4 J
5 M N
6 P Q
7 S T
8 V W
9 Y
0 +
Z
-
H
K
B
E
U
X
O
R
9
.
I
L
C
F
7
8
5
6
3
4
1
2
0
6) Press
[MENU]
to exit.
If you want to cancel
5) Press [
K
/
L
] to select the channel set to decoder off.
• “ ”will disappear.
6) Press [MENU] to exit.
23
EN
Fine Tune Time Zone
ATV
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “TV”, then press
[OK]
.
3) Press [
K
/
L
] to select “Channel”, then press [OK] .
4) Press [
K
/
L
] to select “Fine Tune”, then press [OK] .
• “Channel List” will appear.
Picture
Sound
TV
Setup
Parental
Fine Tune
901
902
-----
-----
Adjust
511.25
MHz
487.25
MHz
Select
BACK
Back
5) Press
[
K
/
L
]
to select a channel you want, then press
[OK]
.
Channel Number:
Name: -----
902
Frequency: 487.25
MHz
Set BACK Cancel
6) Press
[
0
/
1
]
to select a frequency you want, then press
[OK]
.
7) Press [MENU] to exit.
Menu Language Selection
DTV ATV
You can select the menu language.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Setup”, then press [OK] .
3) Press
[
K
/
L
]
to select “Menu Language”.
4) Press [
0
/
1
] to select the language you want.
DTV ATV
You can set the time zone according to the resident area.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “Setup”, then press
[OK]
.
3) Press [
K
/
L
] to select “Time Setup”, then press [OK] .
4) Press
[
K
/
L
]
to select “Time Zone”.
5) Press [
0
/
1
] to select the time difference you want.
Picture
Sound
TV
Setup
Parental
Time Setup
Time Zone
Auto Shut Off
Auto
Off
Select
BACK
Back
Auto : Automatically selects the time zone of your area to ensure the proper performance of the time.
Note: • Although you select “Auto”, the correct time may not
be displayed on the TV Screen Information (p. 13)
depending on DTV broadcasting.
• Clock function in this unit is not available.
6) Press
[MENU]
to exit.
Auto Shut Off
Picture
Sound
TV
Setup
Parental
Setup
Menu Language
Time Setup
Subtitle
Teletext
Common Interface
Reset
5) Press [MENU] to exit.
English
Select
BACK
Back
DTV ATV
You can set the unit to be shut down automatically if no activity is detected after the power is turned on for 4 hours.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Setup”, then press [OK] .
3) Press
[
K
/
L
]
to select “Time Setup”, then press
[OK]
.
4) Press
[
K
/
L
]
to select “Auto Shut Off ”.
5) Press [
0
/
1
] to select (“On, Off ”), then press [OK] .
Picture
Sound
TV
Setup
Parental
Time Setup
Time Zone
Auto Shut Off
Auto
Off
Select
BACK
Back
6) Press [MENU] to exit.
EN
24
Subtitle Settings Teletext
DTV
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “Setup”, then press
[OK]
.
3) Press [
K
/
L
] to select “Subtitle”, then press [OK] .
• “Subtitle” menu will appear.
Picture
Sound
TV
Setup
Parental
Subtitle
Subtitle(Analogue)
Digital Subtitle Language
Digital Subtitle Language 2nd
Subtitle Type
Off
English
English
-
Select
BACK
Back
“Subtitle(Analogue)”
ATV
4) Press
[
K
/
L
]
to select the item you want.
5) Press [
0
/
1
] to select the language you want.
Note: While watching a programme, you can change the subtitle language easily using [ (subtitle)] when it is available.
“Subtitle Type”
DTV
ATV
4) Press
[
K
/
L
]
to select “Subtitle(Analogue)”.
5) Press [
0
/
1
] to select the setting (“Muting, On, Off ”) you want.
“Digital Subtitle Language , Digital Subtitle Language
2nd”
DTV
4) Press [
K
/
L
] to select “Subtitle Type”.
5) Press [
0
/
1
] to select the setting (“-, Hearing Impaired”) you want.
6) Press [MENU] to exit.
DTV ATV
You can change the teletext settings.
1) Press [MENU] to display the menu.
2) Press
[
K
/
L
]
to select “Setup”, then press
[OK]
.
3) Press [
K
/
L
] to select “Teletext”, then press [OK] .
• “Teletext” menu will appear.
Picture
Sound
TV
Setup
Parental
Teletext
Teletext Language
Decoding Page Language
TTX Presentation Level
English
WEST EUR
Level 2.5
Select
BACK
Back
“Teletext Language”
4) Press [
K
/
L
] to select “Teletext Language”.
5) Press
[
0
/
1
]
to select the language you want.
“Decoding Page Language”
You can adjust the decoding paging language.
4) Press
[
K
/
L
]
to select “Decoding Page Language”.
5) Press [
0
/
1
] to select the language you want.
“TTX Presentation Level”
You can adjust the teletext presentation level.
Level 2.5 offers more colours and better graphics than Level 1.5.
4) Press [
K
/
L
] to select “TTX Presentation Level”.
5) Press
[
0
/
1
]
to select the setting (“Level 2.5, Level 1.5”) you want.
6) Press
[MENU]
to exit.
To show the teletext
1) Press [ (text)] to turn on the teletext decoder.
• “Teletext” information will appear.
2) Press [ (text)] repeatedly to show the teletext in transparent mode or picture and teletext mode.
Note: • If you want to select other pages, press
[the Number buttons] or [
K
/
L
] .
• To enlarge fonts, press [ (expand)] .
• To select the teletext subpages, press [ (subpage)] , then press
[the Number buttons] subpage number.
to enter the
• To directly select the page numbers shown at the bottom of the TV screen, use [RED/GREEN/
YELLOW/BLUE] .
• To call up the hidden information, press
[ (reveal)] .
• To hold the current page, press
[
• To hide the teletext, press [SLEEP] .
(hold)]
.
• To go back to the start page, press [ (index)] .
3) Press [ (text)] to turn off the teletext decoder.
25
EN
C.I. (Common Interface) Parental Setting
DTV
This unit is equipped with a C.I. slot. You can enjoy additional services with this function, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed.
1) Turn off the unit and unplug from an AC outlet.
2) Insert the CI module straight to the C.I. slot of this unit.
• Some CI modules may be a two-piece design consisting of a card reader with the viewing card. When using this kind of card, insert the card reader firmly into the C.I. slot on the unit first.
Then, insert the viewing card into the reader.
DTV ATV
You can set the maturity rating, lock the channel, or set the password.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Parental”, then press [OK] .
3) Press
[the Number buttons]
to enter the 4-digit number.
Picture
Sound
TV
Setup
Parental
Parental
PIN Code
BACK
Back
3) Plug this unit into an AC outlet and press
[ Q (standby-on)]
to turn on the unit.
4) Press [MENU] to display the menu.
5) Press
[
K
/
L
]
to select “Setup”, then press
[OK]
.
6) Press [
K
/
L
] to select “Common Interface”, then press
7)
[OK] .
Follow the instructions on the TV screen.
Note: • In case of failure, you need to call your CI service provider.
• Menu operations may vary depending on the viewing card. Refer to the manual accompanying the viewing card.
Reset Default
You can restore all the settings to the default except the memorised channels and parental settings.
1) Press
[MENU]
to display the menu.
2) Press [
K
/
L
] to select “Setup”, then press [OK] .
3) Press [
K
/
L
] to select “Reset”, then press [OK] .
• Confirm message box will appear.
4) Press [
0
/
1
] to select [OK] .
• All the settings are restored to the default except the memorised channels and parental settings.
5) Press [MENU] to exit.
• If you have not set up your password, enter 0000.
• After entering the password, “Parental” menu will appear.
Note: If you select “Reset”, all the settings (except the memorised channels) are reset to the default.
“Channel Lock”
You can set particular channels to be invisible.
4) Press [
K
/
L
] to select “Channel Lock”, then press [OK] .
• “Channel List” will appear.
5) Press
[
K
/
L
]
to select the channel you want to lock, then press
[OK]
.
• “ ”will appear on the right of the channel.
Picture
Sound
TV
Setup
Parental
Channel Lock
18
19
20
21
22
38
901
902
Digital
Digital
Digital
Digital
Digital
Digital
Analogue
Analogue
Set
ETV
Euro CH
Drama Now!
WNS
BCT
Eurasia Station
-----
-----
Select
BACK
Back
6) Press
[MENU]
to exit.
• When you select the locked channel, you need to enter the password to watch.
If you want to unlock
4) Press [
K
/
L
] to select “Channel Lock”, then press [OK] .
• “Channel List” will appear.
5) Press [
K
/
L
] to select the channel you want to unlock, then press [OK] .
• “ ”will disappear.
6) Press
[MENU]
to exit.
EN
26
Software Download
“Maturity Rating”
You can set the parental rating to avoid watching an inappropriate programme for your children.
4) Press [
K
/
L
] to select “Maturity Rating”, then press [OK] .
5) Press [
K
/
L
] to select “Parental Rating”.
6) Press [
0
/
1
] to select the age restriction.
Picture
Sound
TV
Setup
Parental
Maturity Rating
Parental Rating No Block
Select
BACK
Back
DTV
You can update the current software when this unit detects a new version of software.
1) When this unit receives software updates automatically, the following message will appear.
Software Download
Software Version : 00000000
A New Version of software is detected.Do you want to upgrade it ?
7) Press [MENU] to exit.
“Enter PIN Code”
You can set your own password.
4) Press [
K
/
L
] to select “Enter PIN Code”, then press
Picture
Sound
TV
Setup
Parental
Enter PIN Code
Enter new PIN code
Confirmation
BACK
Back
[OK]
5) Press [the Number buttons] to enter the new 4-digit number.
6) Press [the Number buttons] to enter the same 4-digit number again.
.
Accept
Remind me Later
Select Next
2) Press [
K
/
L
] to select “Accept”, then press [
1
] .
• Updating will start automatically.
Note: This process may take up to 60 minutes.
3) After the “Software Download” is completed, press
[
1
]
to restart this unit.
Software Download
Software Version : 00000000
Software upgrades successfully! Restart the TV now?
Accept
Next
7) Press
[MENU]
to exit.
27
EN
advertisement
Related manuals
advertisement
Table of contents
- 2 PRECAUTIONS
- 3 INTRODUCTION
- 3 A Note about Recycling
- 3 Features
- 3 Supplied Accessories
- 3 Trademark Information
- 3 Symbols Used in this Manual
- 4 Contents
- 5 THINGS TO DO FOR THE FIRST TIME
- 5 Attaching the Base
- 5 Fixing the Unit on Your Furniture
- 6 OPERATING CONTROLS AND FUNCTIONS
- 6 Control Panel
- 6 Remote Control
- 7 Rear Panel
- 8 PREPARATION FOR USE
- 8 Installing the Batteries
- 8 Antenna Connection
- 8 External Connection
- 10 Cable Management
- 11 SETUP FOR USE
- 11 Initial Setting
- 12 OPERATIONS
- 12 Watching a TV Programme
- 12 Sleep Timer
- 12 Switching the Input Mode
- 13 Sound Select
- 13 TV Screen Information
- 14 EPG (Electronic Programme Guide)
- 15 Changing the TV Screen Display Mode
- 16 OTHER SETTINGS
- 16 Picture Adjustment
- 17 Advanced Picture Adjustment
- 18 PC Settings
- 18 Sound Adjustment
- 19 Country Setting
- 20 Audio Language Selection
- 20 Auto Scan
- 21 Analogue Manual Scan
- 21 Single RF Scan
- 21 Update Scan
- 21 Channel List
- 22 Channel Skip
- 22 Channel Sort
- 23 Channel Edit
- 23 Channel Decode
- 24 Fine Tune
- 24 Menu Language Selection
- 24 Time Zone
- 24 Auto Shut Off
- 25 Subtitle Settings
- 25 Teletext
- 26 C.I. (Common Interface)
- 26 Reset Default
- 26 Parental Setting
- 27 Software Download
- 28 MAINTENANCE
- 28 Panel Cleaning
- 28 Servicing
- 28 Cabinet Cleaning
- 28 TROUBLESHOOTING GUIDE
- 29 SPECIFICATIONS
- 29 General Specifications
- 29 Other Specifications
- 29 DECLARATION OF CONFORMITY