Turning the Camera On and Off. Pentax Optio Optio RZ10, 16861, 16811, 16841, Optio RZ-10, RZ10, Optio RZ 10, 16826

Turning the Camera On and Off

Power switch

1

1

Press the power switch.

The camera turns on and the display turns on.

When you turn the camera on, the lens cover opens and the lens extends.

If the [Language/ ] screen or [Date Adjustment] screen appears

when you turn the camera on, follow the procedure on p.43 to set the

display language and/or current date and time.

2

Press the power switch again.

The display turns off, the lens closes, and the camera turns off.

Taking Still Pictures 1 p.66

Checking the SD Memory Card

The SD Memory Card is checked when the camera turns on and the memory status is displayed.

a

+ r

The SD Memory Card is inserted. Images and sound files will be saved on the SD Memory

Card.

The SD Memory Card is not inserted. Images and sound files will be saved in the built-in memory.

The write-protect switch on the SD Memory

Card is in the LOCK position (p.39).

Images and sounds cannot be recorded.

Memory status

41

1

Starting-up in the Playback Mode

If you want to play back images or sound files straightaway without taking any pictures, you can start up the camera in the playback mode.

Power switch

Q button

1

Press the power switch while holding down the Q button.

The display turns on with the lens retracted and the camera turns on in the playback mode.

To switch from the playback mode to the capture mode, press the Q button or press the shutter release button halfway.

Playing Back Still Pictures 1 p.132

42