1
2
4
E a b c A d F G D C
Using the Remote Control Unit (optional)
You can take pictures using the remote control F (optional).
1
Press the
(
button in Capture mode to display
i
on the LCD monitor.
The self-timer lamp will blink and the camera is ready to take pictures.
2
Press the shutter release button on the remote control unit.
The self-timer lamp will blink rapidly and the picture will be taken after approximately three seconds.
Playing Back Images and Sound 1 p.89
• The buttons on the camera can be used in the same way.
• Please ensure that the remote control unit is no more than 5 meters away from the front of the camera.
• The distance at which the remote control unit operates may be reduced when taking pictures against the light.
• Press the ( button in step 1 to display h on the LCD monitor to take a picture immediately after pressing the shutter release button on the remote control unit.
!Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera approximately
30,000 times. If the battery needs changing, contact your nearest Pentax customer service center. (A charge is made for replacing the battery.)
78
