How to recall the [
B
Set-up] menu
Four-way controller
OK button
Menu / Fn button
R e c . M o d e
R e c o r d e d P i x e l s
Q u a l i t y L e v e l
W h i t e B a l a n c e
F o c u s i n g A r e a
A E M e t e r i n g
S e n s i t i v i t y
1 / 3
MENU
Exit
2592 1944
AWB
W i d e
A u t o
OK
OK
Registering Functions
You can register the functions you use most frequently on the four-way controller.
The functions can then be set directly by pressing the four-way controller without displaying the [Rec.Mode] menu.
6
Registering a function
1
Select [Fn Setting] on the [
B
Set-up] menu.
2
Press the four-way controller (
5
).
The Fn Setting screen will be displayed.
3
Use the four-way controller (
23
) to choose the key where you want to register a function.
4
Use the four-way controller (
45
) to choose the function you want to register.
If you do not want to register a function, select Off.
5
Press the OK button twice.
The camera is ready to capture or play back images.
• Only one function can be registered on each key of the four-way controller.
• You can choose from the following 12 functions: Recorded Pixels, Quality
Level, White Balance, Focusing Area, AE Metering, Sensitivity, Flash
Exposure Compensation, Digital Zoom, Instant Review, Sharpness,
Saturation Contrast.
• In the default setting, a negative level of Flash Exposure Compensation is registered for (4) and a positive level of Flash Exposure Compensation is registered for (5).
• If the Flash Exposure Compensation is registered to either (2) or (3), levels are compensated positively for (2) and negatively for (3).
122
Twice
F o r m a t
S o u n d
D a t e S t y l e
D a t e A d j u s t
W o r l d T i m e
L a n g u a g e /
1 / 3
MENU
E x i t
S e t - u p m m / d d / y y
1 / 1 / 2 0 0 3
O f f
E n g l i s h
OK
OK
Retrieving a function
1
Enter the Capture mode and press the
Menu / Fn button and the four-way controller key (
2345
) on which a function is registered at the same time.
W h i t e B a l a n c e
2
Press the four-way controller
(
2345
) while pressing the Menu
/ Fn button to change the setting.
3
Release the Menu / Fn button.
The setting is saved and the camera is ready to take the picture.
A W B
If the flash exposure is set by using the four way controller (23), the fourway controller (2) can only be designated for compensation increase and the four-way controller (3) to compensation decrease.
6
Checking the status
1
Press the Menu / Fn button and the
Display button at the same time.
The function settings will be displayed.
R e c o r d e d P i x e l s
Q u a l i t y L e v e l
W h i t e B a l a n c e
F o c u s i n g A r e a
2288 1712
A W B
W i d e
123
