Messages
7
Messages such as the following may be displayed on the LCD monitor during camera operation.
Memory card full
No image & sound
Camera can not display this image.
No card in camera.
Battery depleted.
Memory card error.
This card is not formatted.
Image recording.
Data being recorded.
No images for filter
Formatting
The SD Memory Card memory is full and no more images and sound can be saved. Insert a new SD Memory Card or delete unwanted images. (p.16, p.96)
Change the quality / size and try again. (p.43, p.44)
There are no images and sound on the SD Memory Card to playback.
You are trying to play back an image in a format not supported by this camera. You may be able to display it on another brand of camera or PC.
There is no SD Memory Card in the camera. (p.16)
The battery is exhausted. Charge the NiMH batteries using a battery charger or replace with new batteries.
(p.12, p.13)
Shooting and playback are impossible due to a problem with SD Memory Card. Try displaying on a PC.
The SD Memory Card you have inserted is unformatted or has been formatted on a PC or other device and is not compatible with the camera.
The image / voice recording is being recorded on the SD
Memory Card.
The movie picture is being recorded on the SD Memory
Card.
Displayed when a TIFF image is selected, or when you try to apply a filter effect to an image that has not been saved to a SD Memory Card.
The SD Memory Card is being formatted.
132
Deleting
Image folder could not be created.
The image is being deleted.
The largest file number is assigned to an image and no more images can be saved. Insert a new SD Memory
Card or format the SD Memory Card. (p.112)
This card is not formatted.
Compression error
Data being recorded
Image protected
The SD Memory Card you have inserted is unformatted, or has been formatted on a PC or other device and is not compatible with this camera. (p.112)
Compression of the image you captured has failed.
Change the recorded pixels or quality levels, and take a picture again.
The movie picture is being recorded.
The image you are trying to delete is a protected image.
(p.99)
Alarm set
No DPOF files
The alarm has been enabled.
Displayed when the DPOF button is pressed in PictBridge mode and there are no DPOF settings for an image.
Select the DPOF settings for the image.
Displayed when a printer error occurs in PictBridge mode.
Printer error / Print aborted
Connect camera & printer
No image
Safely remove USB cable
Displayed when PictBridge is selected from the Playback menu.
Displayed in PictBridge mode when there are no images that can be printed saved in a SD Memory Card.
Displayed when you choose not to continue printing in
PictBridge mode.
7
133
