Removing the Battery Pack. Canon BP-511

Inserting and Removing the Battery Pack

Battery Life

Temperature

Normal (20

°

C/68

°

F)

Low (0

°

C/32

°

F)

Shooting conditions

No flash use 50% flash use

Approx. 620

Approx. 480

Approx. 490

Approx. 400

●

The above figures were obtained under Canon test conditions (fully charged battery, EF

50mm f/1.4 USM lens, Review function [On], Review Time [2 sec.], Quality [Large ]).

●

The number of shots may be less than indicated in some cases, due to differences in operating conditions.

●

The number of shots is reduced by frequent use of the LCD monitor.

●

Holding the shutter button halfway down for long periods to use the AF function without taking a shot can reduce the number of shots.

●

In low temperature conditions (0

°

C/32

°

F), the number of shots may be less than indicated.

●

Regarding the battery life (number of shots) with Battery Grip BG-ED3

(optional), refer to the BG-ED3’s instructions.

Removing the Battery Pack

1

Open the battery cover.

●

Slide the lever in the direction shown by the arrow in the diagram, and open the cover as shown.

1

2

Remove the battery pack.

●

Slide the battery lock lever in the direction shown by the arrow, and remove the battery.

3

Close the battery cover.

●

Press the cover closed until it clicks shut.

25