Remote Level Control. Jensen XA4300, XA4200

®

XA4200, XA4300

Inputs, RCA Output, Remote Level Control

XA4200

REAR

HI-LEVEL

LR

INPUT OUTPUT

LR

RR RR

LF

INPUT OUTPUT

LF

RF RF

FRONT

HI-LEVEL

XA4300

REMOTE

BASS

REAR

HI-LEVEL

LR

INPUT OUTPUT

LR

RR RR

LF

INPUT OUTPUT

LF

RF RF

FRONT

HI-LEVEL

Input Wiring

Low Level Input (RCA Input)

Low level (RCA) input is preferred for best performance. Most trunk/hatchback installations will require a 15-20 foot RCA cable. While pickup trucks and under-seat mounting will require a 6-10 foot RCA cable. Connect an RCA cable from your receiver to the RCA input on your amplifier.

High Level Input

High level input should be used when an RCA output is not available from the receiver.

Connect the speaker outputs from the receiver to the high level input connector.

White = Left (+)

White/Black = Left (–)

Gray = Right (+)

Gray/Black = Right (–)

Black (ground)

REAR

HI-LEVEL

Splice

(as necessary)

Hi Level

LR

INPUT OUTPUT

LR

RR RR

Radio

LF

INPUT OUTPUT

LF

RF RF

Low Level

FRONT

HI-LEVEL

Hi Level

Important

Only connect the low (RCA) or high level input.

Do not use both at the same time.

6

5910 XA4CH_E.p65

6 01/23/01, 12:24 PM