advertisement
Setting setup language
The DVD set up language can be selected.
Preparation:
•
•
•
•
Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.
Press POWER on the unit or on the remote control to turn on the
TV/DVD.
When the unit is TV or AUX1/2 mode, press OPEN/CLOSE or
PLAY to turn the DVD power to on.
When using an amplifier, switch on the amplifier.
1
Press SET UP in the stop mode.
(Confirm DVD power is on.) The
DVD set up menu screen will appear.
1) RATING LEVEL
2) AUDIO
3) SUBTITLE
4) TV SCREEN
5) OSD DISPLAY
6) MENU LANGUAGE
7) AUDIO OUTPUT
8) SETUP LANGUAGE
PRESS RETURN TO EXIT
2
Press UP or DOWN to select
SETUP LANGUAGE, then press
SELECT.
1) RATING LEVEL
2) AUDIO
3) SUBTITLE
4) TV SCREEN
5) OSD DISPLAY
6) MENU LANGUAGE
7) AUDIO OUTPUT
8) SETUP LANGUAGE
PRESS RETURN TO EXIT
3
Press UP or DOWN to select desired language(e.g. ENGLISH), then press SELECT.
SETUP LANGUAGE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
PRESS RETURN TO EXIT
4
To make SET UP screen disappear, press RETURN while the
SET UP screen is being appeared.
DVD power:
When not in use the DVD or changed from DVD mode to the TV or
AUX1/2 mode after used DVD, the DVD section will automatically turn off to save electric power consumption.
To turn the DVD power to on press OPEN/CLOSE or PLAY.
DVD set up menu:
The DVD set up menu will appear in the DVD mode (DVD power is on) and also the DVD is stop mode.
27
advertisement
Related manuals
advertisement